Installation Instruction
Table Of Contents
- Extractor hood
- en
- Table of contents
- 1 Safety
- 2 Avoiding material damage
- 3 Environmental protection and saving energy
- 4 Operating modes
- 5 Familiarising yourself with your appliance
- 6 Basic operation
- 7 Cleaning and servicing
- 8 Troubleshooting
- 9 Disposal
- 10 Customer Service
- 11 Accessories
- 12 Installation instructions
- 12.1 Scope of delivery
- 12.2 Safety clearances
- 12.3 Appliance dimensions
- 12.4 Secure installation
- 12.5 General information
- 12.6 Instructions for the electrical connection
- 12.7 Information on the installation situation
- 12.8 Instructions for the exhaust air pipe
- 12.9 Instructions for the air extraction mode
- 12.10 Installation
Installation instructions en
15
4.
Screw the upper flue cover to the sides of the retain-
ing bracket using the 2screws.
5.
Note:To prevent scratches, lay soft towels over the
edges of the outer flue duct to protect the surface.
Place the lower flue duct on the appliance and pull
it slightly apart.
6.
Use 2 long screws to screw the lower flue duct sec-
tion tightly to the appliance from below.
7.
Note:Align the flue duct before tightening the 2
screws.
Screw the lower flue duct to the sides of the retain-
ing bracket using 2 short screws.
8.
Carefully remove the towels.