Installation Instruction

en Cleaning and servicing
8
8.5 Cleaning grease filters manually
The grease filters filter the grease from the cooking va-
pour. Regularly cleaned grease filters guarantee a high
level of grease removal.
WARNING‒Risk of fire!
Fatty deposits in the grease filters may catch fire.
▶
Clean the grease filters roughly every2 months.
Requirement:The grease filters have been removed.
→"Removing the grease filter", Page7
1.
Observe the information regarding the cleaning
agents.
→"Cleaning products", Page7
2.
Soak the grease filter in hot soapy water.
Use special grease solvent for stubborn dirt. You
can obtain grease solvents from after-sales service
or the online shop.
3.
Use a brush to clean the grease filters.
4.
Rinse the grease filters thoroughly.
5.
Allow the grease filters to drain.
8.6 Cleaning grease filters in the
dishwasher
The grease filters filter the grease from the cooking va-
pour. Regularly cleaned grease filters guarantee a high
level of grease removal.
WARNING‒Risk of fire!
Fatty deposits in the grease filters may catch fire.
▶
Clean the grease filters roughly every2 months.
ATTENTION!
The grease filters may become damaged if they are
squeezed.
▶
Do not squeeze the grease filters.
Note:When cleaning the grease filter in the dish-
washer, light discolouration may occur. This discoloura-
tion has no effect on the performance of the metal
grease filters.
Requirement:The grease filters have been removed.
→"Removing the grease filter", Page7
1.
Observe the information regarding the cleaning
agents.
→"Cleaning products", Page7
2.
Place the grease filters loosely into the dishwasher.
Do not clean heavily soiled grease filters with
utensils.
Use special grease solvent for stubborn dirt. You
can obtain grease solvents from after-sales service
or the online shop.
3.
Start the dishwasher.
Select a temperature of no more than 70°C.
4.
Allow the grease filters to drain.
8.7 Installing the grease filters
ATTENTION!
Falling grease filters may damage the hob below.
▶
Grip below the grease filter with one hand.
1.
Carefully insert the grease filters ⁠.
2.
The locks engage ⁠.
3.
Ensure that the locks engage.
8.8 Odour filter for recirculating air
mode
Odour filters bind odorous substances in air recircula-
tion mode. Regularly replaced odour filters guarantee a
high level of odour removal.
With normal use (approx.onehour a day), the odour fil-
ter must be replaced every 6 months. The odour filter
cannot be cleaned or regenerated.
You can obtain odour filters from the after-sales service
or the online shop. Only use original odour filters.
→"Accessories", Page6
8.9 Installing the odour filters
Requirement:The grease filters have been removed.
→"Removing the grease filter", Page7
1.
Insert the screw through the wing nut and the
sleeve, and screw it in in the centre of the intermedi-
ate floor.
The screw, wing nut and sleeve are included with
the odour filter.