Installation Instruction
Table Of Contents
- Extractor hood
- en
- Table of contents
- 1 Safety
- 2 Avoiding material damage
- 3 Environmental protection and saving energy
- 4 Operating modes
- 5 Familiarising yourself with your appliance
- 6 Accessories
- 7 Basic operation
- 8 Cleaning and servicing
- 8.1 Cleaning products
- 8.2 Cleaning the appliance
- 8.3 Cleaning controls
- 8.4 Removing the grease filter
- 8.5 Cleaning grease filters manually
- 8.6 Cleaning grease filters in the dishwasher
- 8.7 Installing the grease filters
- 8.8 Odour filter for recirculating air mode
- 8.9 Installing the odour filters
- 8.10 Replacing the odour filter
- 9 Troubleshooting
- 10 Disposal
- 11 Customer Service
- 12 Installation instructions
- 12.1 Included with the appliance
- 12.2 Safety clearances
- 12.3 Dimensions
- 12.4 Surround dimensions
- 12.5 Secure installation
- 12.6 General information
- 12.7 Instructions for the electrical connection
- 12.8 Information on the installation situation
- 12.9 Instructions for the exhaust air pipe
- 12.10 Instructions for the air extraction mode
- 12.11 Information about circulating-air mode
- 12.12 Installation
en Familiarising yourself with your appliance
6
5 Familiarising yourself with your appliance
5.1 Control panel
You can use the control panel to configure all functions
of your appliance and to obtain information about the
operating status.
Switching the lighting on or off
Switching on fan setting1
Switching on fan setting2
Switching on fan setting3
Switching on intensive mode
6 Accessories
You can buy accessories from the after-sales service,
from specialist retailers or online. Only use original ac-
cessories, as these have been specifically designed for
your appliance.
Accessories vary from one appliance to another. When
purchasing accessories, always quote the exact
product number (E no.) of your appliance. →Page10
You can find out which accessories are available for
your appliance in our catalogue, in the online shop or
from our after-sales service.
www.neff-international.com
Accessories Order number
Standard odour filter (re-
placement)
Z5155X0
Ventilation grille 095660
7 Basic operation
7.1 Switching on the appliance
▶
Set the slide control to the required fan setting.
a The appliance starts at the selected fan setting.
7.2 Switching off the appliance
▶
Set the slide control to the zero setting.
7.3 Switching on the intensive setting
If particularly strong odours or vapours develop, you
can use intensive mode.
▶
Set the slide control to .
a The intensive setting is switched on.
7.4 Switching off the intensive setting
▶
Set the slide control to fan setting , or .
7.5 Switching on the lighting
The lighting can be switched on and off independently
of the ventilation system.
▶
Press .
7.6 Switching off the lighting
▶
Press .