Installation Instruction
Table Of Contents
- Extractor hood
- en
- Table of contents
- 1 Safety
- 2 Avoiding material damage
- 3 Environmental protection and saving energy
- 4 Operating modes
- 5 Familiarising yourself with your appliance
- 6 Accessories
- 7 Basic operation
- 8 Cleaning and servicing
- 8.1 Cleaning products
- 8.2 Cleaning the appliance
- 8.3 Cleaning controls
- 8.4 Removing the grease filter
- 8.5 Cleaning grease filters manually
- 8.6 Cleaning grease filters in the dishwasher
- 8.7 Installing the grease filters
- 8.8 Odour filter for recirculating air mode
- 8.9 Installing the odour filters
- 8.10 Replacing the odour filter
- 9 Troubleshooting
- 10 Disposal
- 11 Customer Service
- 12 Installation instructions
- 12.1 Included with the appliance
- 12.2 Safety clearances
- 12.3 Dimensions
- 12.4 Surround dimensions
- 12.5 Secure installation
- 12.6 General information
- 12.7 Instructions for the electrical connection
- 12.8 Information on the installation situation
- 12.9 Instructions for the exhaust air pipe
- 12.10 Instructions for the air extraction mode
- 12.11 Information about circulating-air mode
- 12.12 Installation
Installation instructions en
11
12.1 Included with the appliance
After unpacking all parts, check for any damage in
transit and completeness of the delivery.
Appliance width 530mm
Appliance width 730mm
12.2 Safety clearances
Comply with the safety clearances for the appliance.
12.3 Dimensions
You will find the dimensions of the appliance here
Appliance width 530mm