Assembly & Installation Instructions
Table Of Contents
- Extractor hood
- en
- Table of contents
- 1 Safety
- 2 Avoiding material damage
- 3 Environmental protection and saving energy
- 4 Operating modes
- 5 Familiarising yourself with your appliance
- 6 Accessories
- 7 Basic operation
- 8 Cleaning and servicing
- 9 Troubleshooting
- 10 Disposal
- 11 Customer Service
- 12 Installation instructions
- 12.1 Scope of delivery
- 12.2 Appliance dimensions
- 12.3 Safety clearances
- 12.4 Secure installation
- 12.5 General information
- 12.6 Instructions for the electrical connection
- 12.7 Information on the installation situation
- 12.8 Instructions for the exhaust air pipe
- 12.9 Instructions for the air extraction mode
- 12.10 Information about circulating-air mode
- 12.11 Installation
- 12.11.1 Checking the unit
- 12.11.2 Preparing the units
- 12.11.3 Preparing the appliance
- 12.11.4 Preparing circulating-air mode
- 12.11.5 Installing the appliance
- 12.11.6 Establishing the exhaust air connection
- 12.11.7 Establishing the connection for the circulated air
- 12.11.8 Connecting to the power supply
- 12.11.9 Removing the appliance
en Accessories
6
6 Accessories
You can buy accessories from the after-sales service,
from specialist retailers or online. Only use original ac-
cessories, as these have been specifically designed for
your appliance.
Accessories vary from one appliance to another. When
purchasing accessories, always quote the exact
product number (E no.) of your appliance. →Page10
You can find out which accessories are available for
your appliance in our catalogue, in the online shop or
from our after-sales service.
www.neff-international.com
Accessories Order number
Standard odor filter Z5135X1
Standard recirculation kit Z5135X3
Clean Air Plus air recircu-
lation set
Z51IXC1X6
Clean Air Plus odor filter
(replacement)
Z51IXB1X6
LongLife air recirculation
set
Z51ITD1X1
Long Life odour filter (re-
placement)
Z51ITP0X0
7 Basic operation
7.1 Switching on the appliance
▶
Press .
a The appliance starts at fan setting 1.
7.2 Setting a fan level
▶
Press , or .
Note:
The LED indicates which fan level is currently set:
¡ Fan level 1: LED lights up green.
¡ Fan level 2: LED lights up orange.
¡ Fan level 3: LED lights up red.
7.3 Switching off the appliance
▶
Press .
Note:If the fan is running at level 2 or 3, press
twice.
7.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
▶
Press and hold .
a The LED flashes red.
a After approx. six minutes, the appliance automatic-
ally switches to a lower fan setting.
Note:You can switch on the intensive mode directly in
off-mode. Once the sixminutes has elapsed, the appli-
ance is switched off again.
7.5 Switching on the lighting
The lighting can be switched on and off independently
of the ventilation system.
▶
Press .
7.6 Switching off the lighting
▶
Press .