Assembly Instructions
Table Of Contents
- Extractor hood
- de
- Inhaltsverzeichnis
- 1 Sicherheit
- 2 Sachschäden vermeiden
- 3 Umweltschutz und Sparen
- 4 Betriebsarten
- 5 Kennenlernen
- 6 Zubehör
- 7 Grundlegende Bedienung
- 8 Reinigen und Pflegen
- 9 Störungen beheben
- 10 Entsorgen
- 11 Kundendienst
- 12 Montageanleitung
- en
- Table of contents
- 1 Safety
- 2 Avoiding material damage
- 3 Environmental protection and saving energy
- 4 Operating modes
- 5 Familiarising yourself with your appliance
- 6 Accessories
- 7 Basic operation
- 8 Cleaning and servicing
- 9 Troubleshooting
- 10 Disposal
- 11 Customer Service
- 12 Installation instructions
- 12.1 Scope of delivery
- 12.2 Appliance dimensions
- 12.3 Safety clearances
- 12.4 Secure installation
- 12.5 General information
- 12.6 Instructions for the electrical connection
- 12.7 Information on the installation situation
- 12.8 Instructions for the exhaust air pipe
- 12.9 Instructions for the air extraction mode
- 12.10 Information about circulating-air mode
- 12.11 Installation
- fr
- Table des matières
- 1 Sécurité
- 2 Prévenir les dégâts matériels
- 3 Protection de l'environnement et économies d'énergie
- 4 Modes de fonctionnement
- 5 Description de l'appareil
- 6 Accessoires
- 7 Utilisation
- 8 Nettoyage et entretien
- 8.1 Produits de nettoyage
- 8.2 Nettoyer l'appareil
- 8.3 Nettoyage des éléments de commande
- 8.4 Démontage des filtres à graisse métallique
- 8.5 Nettoyage manuel des filtres à graisse
- 8.6 Nettoyage des filtres à graisse au lave-vaisselle
- 8.7 Filtre anti-odeurs pour le mode recirculation de l'air
- 8.8 Montage des filtres à graisse
- 9 Dépannage
- 10 Mise au rebut
- 11 Service après-vente
- 12 Instructions de montage
- 12.1 Contenu de la livraison
- 12.2 Dimensions de l’appareil
- 12.3 Distances de sécurité
- 12.4 Installation en toute sécurité
- 12.5 Indications générales
- 12.6 Remarques concernant le branchement électrique
- 12.7 Remarques concernant la situation d'encastrement
- 12.8 Remarques concernant le conduit d'évacuation
- 12.9 Remarques sur le mode évacuation extérieure
- 12.10 Remarques sur le mode recirculation de l'air
- 12.11 Installation
- it
- Indice
- 1 Sicurezza
- 2 Prevenzione di danni materiali
- 3 Tutela dell'ambiente e risparmio
- 4 Modalità di funzionamento
- 5 Conoscere l'apparecchio
- 6 Accessori
- 7 Comandi di base
- 8 Pulizia e cura
- 9 Sistemazione guasti
- 10 Smaltimento
- 11 Servizio di assistenza clienti
- 12 Istruzioni per il montaggio
- 12.1 Contenuto della confezione
- 12.2 Dimensioni apparecchio
- 12.3 Distanze di sicurezza
- 12.4 Montaggio sicuro
- 12.5 Avvertenze generali
- 12.6 Avvertenze sul collegamento elettrico
- 12.7 Avvertenze sulla situazione d'installazione
- 12.8 Avvertenze sul condotto di scarico
- 12.9 Avvertenze per un funzionamento ad aria di scarico
- 12.10 Avvertenza per un funzionamento a ricircolo d'aria
- 12.11 Montaggio
Troubleshooting en
21
Use special grease solvent for stubborn dirt. You
can obtain grease solvents from after-sales service
or the online shop.
3.
Use a brush to clean the grease filters.
4.
Rinse the grease filters thoroughly.
5.
Allow the grease filters to drain.
8.6 Cleaning grease filters in the
dishwasher
The grease filters filter the grease from the cooking va-
pour. Regularly cleaned grease filters guarantee a high
level of grease removal.
WARNING‒Risk of fire!
Fatty deposits in the grease filters may catch fire.
▶ Clean the grease filters roughly once a month.
ATTENTION!
The grease filters may become damaged if they are
squeezed.
▶ Do not squeeze the grease filters.
Note:When cleaning the grease filter in the dish-
washer, light discolouration may occur. This discoloura-
tion has no effect on the performance of the metal
grease filters.
Requirement:The grease filters have been removed.
→"Removing the grease filter", Page20
1.
Observe the information regarding the cleaning
agents.
2.
Place the grease filters loosely into the dishwasher.
Do not clean heavily soiled grease filters with
utensils.
Use special grease solvent for stubborn dirt. You
can obtain grease solvents from after-sales service
or the online shop.
3.
Start the dishwasher.
Select a temperature of no more than 70°C.
4.
Allow the grease filters to drain.
8.7 Odour filter for recirculating air mode
Odour filters bind odorous substances in air recircula-
tion mode. Regularly replaced odour filters guarantee a
high level of odour removal.
With normal use (approx.onehour a day), the odour fil-
ter must be replaced every 3 months. The odour filter
cannot be cleaned or regenerated.
You can obtain odour filters from the after-sales service
or the online shop. Only use original odour filters.
Removing the odour filter
1.
Remove the grease filter. →Page20
2.
Remove the grid and the grease filter.
Fitting odour filters
1.
Place the odour filter on the grease filter.
2.
Use the grid to secure the odour filter.
8.8 Fitting grease filters
ATTENTION!
Falling grease filters may damage the hob below.
▶ Grip below the grease filter with one hand.
1.
Fit the grease filters.
2.
Fold the grease filters upwards and engage the
locks.
3.
Make sure that the locks engage.
9 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING‒Risk of injury!
Improper repairs are dangerous.
▶ Repairs to the appliance should only be carried out
by trained specialist staff.
▶ If the appliance is defective, call Customer Service.
9.1 Malfunctions
Fault Cause and troubleshooting
The appliance is not
working.
The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.
The circuit breaker is faulty.
▶
Check the circuit breaker in the fuse box.