Assembly & Installation Instructions

en Installation

5Installation

Instal l ati on

Sliding the appliance up into place

1. Slide the appliance up into place and make sure it is

positioned correctly. ¨

2. Measure the distance between the appliance and

the wall, and mark this on the filler strip.

3. If required, shorten the filler strip to the required

dimension. ©

Sliding out the appliance

Note: Before you remove the appliance, protect the hob

with a piece of polystyrene from the packaging.

1. Use a flat-blade screwdriver to push in the fastening

bolt, and turn it 90° until it locks into place. ¨

2. Push in the fastening bolt gently with your fingers,

and turn it until it comes out of the housing along

Pull gently on the fastening bolt; before you do this,

take hold of the appliance from beneath with the

other hand. ª

3. Carefully remove the appliance.

$ %

 