Assembly & Installation Instructions

en Customer service
10
4Customer service
Cu s t o mer ser vi ce When calling us, please give the product number
(E no.) and the production number (FD no.) so that we
can provide you with the correct advice. The rating plate
with these numbers can be found inside the appliance
(remove the metal mesh grease filter to gain access).
You can make a note of the numbers of your appliance
and the telephone number of the after-sales service in
the space below to save time should it be required.
Please be aware that a visit by an after-sales engineer
will be charged if a problem turns out to be the result of
operator error, even during the warranty period.
Please find the contact data of all countries in the
enclosed customer service list.
To book an engineer visit and product advice
Rely on the professionalism of the manufacturer. You
can therefore be sure that the repair is carried out by
trained service technicians who carry original spare
parts for your appliances.
Accessories
(not included in the scope of delivery)
Note: These instructions apply to several appliance
models. It may be the case that an optional accessory
that is listed does not apply for your appliance.
Note: Observe the installation instructions in the
accessory.
--------
E no. FD no.
After-sales serviceO
GB 0344 892 8989
Calls charged at local or mobile rate.
IE 01450 2655
0.03 € per minute at peak. Off peak 0.0088 €
per minute.
Accessory Order number
Basic equipment:
Starter set for circulating-air mode
Easy-change filter for starter set
Z54TS02X0
Z54TC02X0
Basic equipment:
CleanAir air recirculation module
Easy-change filter for CleanAir air recirculation
module
Z54TR60X0
Z54TR00X0
Lowering frame:
Appliance width: 60 cm Z54TL60X0
Lowering frame:
Appliance width: 90 cm Z54TL90X0
Installation set:
Upper cabinet: 90 cm Z54TM90X0