Instruction manual

en Steam
22
The cooking time has elapsed
As soon as the end time has been reached, an audible
signal sounds and the appliance ends the microwave
operation automatically.
"
x End" appears on the display.
Touch the
# touch button to stop the audible signal.
To restart the microwave operation, touch the # touch
button.
Otherwise, touch the # touch button to switch off the
appliance.
Pausing the operation
Touch the # touch button to pause the oven. Press the
# touch button again to continue the operation.
Opening the appliance door interrupts the operation.
The operation continues to run automatically when the
door is closed.
Cancelling the operation
Touch the # touch button.
`Steam
St e a m With some heating modes, you can prepare food with
steam assistance. In addition, the Dough proving and
Reheat heating modes are available.
:Warning – Risk of scalding!
When you open the appliance door, hot steam can
escape. Steam may not be visible, depending on its
temperature. When opening, do not stand too close to
the appliance. Open the appliance door carefully. Keep
children away.
VarioSteam – Steam-assisted cooking
When you cook with steam assistance, steam is
introduced into the cooking compartment at various
intervals and with varying degrees of intensity. This
gives you a better cooking result.
Your food
■ Becomes crispy on the outside
■ Develops a shiny surface
■ Is succulent and tender on the inside
■ Only undergoes a minimum reduction in volume
You set the combination of heating mode and steam
intensity that you want. Use the information in the tables
to select a suitable heating mode and steam intensity.
Alternatively, select a program from the steam
programs. ~ "Tested for you in our cooking studio"
on page 41~ "Programmes" on page 39
Steam intensity
Different intensity levels are available when adding
steam:
■ Low
■ Medium
■ High
Suitable types of heating
You can switch on steam assistance for these types of
heating:
■ Hot air ‚
■ Top/bottom heating ƒ
■ Circo-roasting ‡
■ Keeping warm «
Starting
1. Touch the # touch button.
2. Fill the water tank.
3. Set the type of heating and temperature.
4. Touch the Ž touch button to switch on steam
assistance.
5. On the display, swipe to the left or right to select the
steam intensity.
6. Touch the 8 symbol to apply the setting.
7. Touch the # touch button.
The appliance starts the operation.
Note: If the water tank runs dry during an operation with
steam assistance, a message appears on the display
prompting you to fill up the water tank.