User Manual

en Microwave
18
Accessories included
Only the wire rack provided is suitable when using the
microwave only. If you use the universal pan or the
baking tray, this may create sparks, which may damage
the cooking compartment.
When using the appliance in combination with the
microwave or "Dishes" mode, you can use the universal
pan, baking tray or any other accessories that have
been included with the appliance.
When using the microwave, it is best to insert
accessories at level 1, unless otherwise specified.
Microwave output settings
You can set five different output settings for your
microwave.
Setting the microwave
To achieve optimum results with the microwave, always
insert the wire rack at shelf position 1.
1. Touch the # touch button to switch on the
appliance.
2. Touch the 0 touch button.
The main menu appears.
3. Use the ( or ) button to select "Microwave •".
4. Use the & button to open the microwave menu.
A microwave output setting and cooking time are
suggested.
5. Use the ( or ) button to set the required microwave
output setting.
6. Use the & button to navigate to the next line.
7. Use the ( or ) button to set the required cooking
time.
8. Touch the # touch button to start the appliance
operation.
The # touch button lights up red. The cooking time
counts down on the display.
Changing the cooking time
You can change the cooking time at any time during
operation by touching the ( or ) touch button.
Changing the microwave output setting
1. Touch the # touch button and reset the microwave
output setting and cooking time.
2. Touch the # touch button to start the appliance
operation.
The cooking time has elapsed
As soon as the end time has been reached, an audible
signal sounds and the appliance ends the microwave
operation automatically.
"x Finished" appears on the display.
Touch the 0 touch button to stop the audible signal.
If you want to set a new cooking time, touch the #
touch button.
Otherwise, touch the # touch button to switch off the
appliance.
Pausing the operation
Touch the # touch button to pause the oven. Press the
# touch button again to continue the operation.
Opening the appliance door interrupts the operation.
Touch the # touch button once the door has been
closed. The operation continues.
Cancelling the operation
Touch the # touch button.
Starting drying
During drying, the cooking compartment is heated up
so that the moisture in the cooking compartment
evaporates. Then open the appliance door so that the
steam escapes.
Caution!
Enamel damage: Do not start any operations when
there is water on the cooking compartment floor. Before
operation, wipe away the water from the cooking
compartment floor.
1. Leave the appliance to cool down.
2. Remove the worst dirt from the cooking
compartment immediately and wipe away moisture
from the cooking compartment floor.
3. If necessary, touch the # touch button to switch the
appliance on.
4. Touch the 0 touch button to display the operating
modes.
5. Use the ( or ) button to select "Drying ª".
6. Use the & button to navigate to the next line.
The duration is displayed. It cannot be changed.
7. Use the & button to navigate to the next line.
8. Touch the # touch button.
The drying function is started and is ended
automatically after 10 minutes.
9. Open the appliance door and leave it open for 1 to 2
minutes so that the moisture in the cooking
compartment can escape.
Output Food Maximum cook-
ing time
90 W For defrosting delicate foods 1 hr 30 mins
180 W For defrosting and continued cooking 1 hr 30 mins
360 W For cooking meat and for heating del-
icate foods
1 hr 30 mins
600 W For heating and cooking food 1 hr 30 mins
max For heating liquids 30 mins