Instruction manual
Table Of Contents
- Table of contents
- en Instruction manual
- ( Important safety information 4
- ] Causes of damage 7
- 7 Environmental protection 7
- * Getting to know your appliance 8
- K Before using for the first time 9
- 1 Operating the appliance 10
- ^ Microwave 11
- O Timer 12
- P Programmes 13
- Q Basic settings 15
- D Cleaning 16
- 3 Trouble shooting 17
- 4 Customer service 18
- J Tested for you in our cooking studio 18
- E Test dishes 22
- 8 Intended use
- ( Important safety information
- Important safety information
- General information
- Microwave
- Environmentally-friendly disposal
- Control panel
- Controls
- Touch buttons
- ShiftControl control
- Automatic door opening
- Interior lighting
- Cooling fan
- Setting the language
- Setting the time
- 1. Use the & button to navigate to the next line.
- 2. Use the ( or ) button to select the current hour.
- 3. Use the & button to navigate to the next line.
- 4. Use the ( or ) button to select the current minute.
- 5. Press the % button repeatedly until "Time" appears.
- 6. Use the ) button to select the next setting.
- Setting the date
- 1. Use the & button to navigate to the next line.
- 2. Use the ( or ) button to select the current day.
- 3. Use the & button to navigate to the next line.
- 4. Use the ( or ) button to select the current month.
- 5. Use the & button to navigate to the next line.
- 6. Use the ( or ) button to select the current year.
- 7. Press the % button repeatedly until "Date" appears.
- 8. Use the ) button to apply the settings.
- Switching on the appliance
- Switching off the appliance
- Starting the operation
- Pausing the operation
- Suitable cookware
- Unsuitable cookware
- Cookware test
- 1. Heat the empty cookware at maximum power for ½ to 1 minute.
- 2. Check the temperature of the cookware during this time.
- 2. Use the ( or ) touch button to select the required microwave output.
- 3. Touch the & touch button.
- 4. Use the ( or ) touch button to set the required cooking time.
- 5. Touch the # touch button.
- Cooking time elapsed
- Changing the cooking time
- Changing the microwave output
- Changing the timer
- Cancelling the timer
- P Programmes
- Setting a programme
- 2. Touch the 0 touch button.
- 3. Use the ( or ) touch button to select the ± operating mode.
- 4. Touch the & touch button.
- 5. Use the ( or ) touch button to set the required programme.
- 6. Touch the & touch button.
- 7. Use the ( or ) touch button to set the required weight.
- 8. Touch the & touch button.
- 9. Touch the # touch button.
- 2. Touch the 0 touch button.
- 3. Use the ( or ) touch button to select the "" settings".
- 4. Use the & touch button to navigate to the next line.
- 5. Use the ( or ) touch button to select the setting.
- 6. If necessary, use the & touch button to navigate to the next line.
- 7. Use the ( or ) touch button to select the setting.
- 8. Touch the 0 touch button.
- 9. To save the setting, use the & touch button to select "Save".
- 2. Touch the 0 touch button.
- 3. Use the ( or ) touch button to select the "" settings".
- 4. Use the & touch button to navigate to the next line.
- 5. Use the ( or ) touch button to select the time.
- 6. If necessary, use the & touch button to navigate to the next line.
- 7. Use the ( or ) touch button to change the time.
- 8. Touch the 0 touch button.
- 9. To save the setting, use the & touch button to select "Save".
- en Instruction manual
Trouble shooting en
17
3Trouble shooting
Tr oubl e s hoot i ng
If a fault occurs, there is often a simple explanation.
Before calling the after-sales service, please refer to the
fault table and attempt to correct the fault yourself.
Tip: If a dish does not turn out exactly as you wanted,
refer to the following chapter, where you will find lots of
tips and notes relating to the optimum
settings.~ "Tested for you in our cooking studio"
on page 18
:Warning
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by
one of our trained after-sales technicians. If the
appliance is defective, unplug the appliance from the
mains or switch off the circuit breaker in the fuse box.
Contact the after-sales service.
Fault table
--------
Fault Possible cause Remedy/information
The appliance does not work or the
display is not working
The plug is not plugged into the mains Connect the appliance to the electricity supply
Power cut Check whether other kitchen appliances are working
The circuit breaker is faulty Check in the fuse box to make sure that the fuse for
the appliance is OK
Faulty operation Switch off the circuit-breaker for the appliance in the
fuse box and switch it back on after approx. 60 sec-
onds
The appliance cannot be started The appliance door is not fully closed Close the appliance door
Appliance does not heat up.
The 6 symbol for demo mode is
shown in the display.
The appliance is in demo mode Deactivate demo mode in the basic settings.
To do this, briefly disconnect the appliance from the
mains (switch off the household fuse or the circuit
breaker in the fuse box). Then deactivate demo mode
in the basic settings within 3 minutes.
The interior lighting is not working The interior lighting is faulty Call the after-sales service
Error message "Exxx"* If an error message is displayed, switch the appliance
off and on again; if the message disappears, it was a
one-off problem. If the fault occurs again or the error
message is still displayed, please contact the after-
sales service and provide the fault code.
* Special features:
Error message "E0532": Open and close the appliance door.
Error message "E6501": Switch off the appliance. Wait for 10 minutes. Switch the appliance on again.