Installation instructions

Table Of Contents
Installation instructions en
27
19.6 Installation in a tall unit
Observe the installation dimensions and the safety
clearances in a tall unit.
Do not fit the appliance too high up; it must be pos-
sible for accessories to be removed easily.
Fit the feet.
19.7 Installing the appliance
1.
Push the appliance in fully.
Do not kink or trap the connection cable, or route it
over sharp edges.
2.
Check the clearance to the adjacent appliances.
3.
ATTENTION!
When opening the appliance door, the appliance
may tilt forwards.
Hold the appliance in position when opening the
appliance door.
Open the appliance door slowly.
4.
Screw the appliance to the unit on the opposite side
to the hinges.
5.
Pre-drill the screw holes in the unit on the side with
the hinges.
Cover the door hinges.
Use a wood drill with a 2 mm diameter.