Installation instructions

en Timer
14
Dish Suitable food Weight range
inkg
Cookware/accessories
Frozen vegetables
1
Cauliflower, broccoli, carrots, kohlrabi, red
cabbage, spinach
0.10-0.55 Cookware with lid
Cooking compartment floor
Boiled potatoes Potatoes with or without skin, potatoes cut
into pieces of an equal size
0.10-0.55 Cookware with lid
Cooking compartment floor
Rice
1
Long-grain rice 0.10-0.55 Deep cookware with lid
Cooking compartment floor
Baked potatoes
1
Potatoes with skin, approx.6cm thick 0.10-0.55 Wire rack
Cooking compartment floor
1
Observe the signals given when it is time to stir the food.
Combi mode
Dish Suitable food Weight range
inkg
Cookware/accessories
Lasagne, frozen Lasagne or a similar frozen bake 0.10-0.55 Cookware without lid
Chicken pieces, fresh Chicken thigh, half chicken 0.10-0.55 Glass tray and wire rack
12 Timer
You can set the time on the timer. Once this time has
elapsed, a signal tone sounds. You can set a maximum
time on the timer of 24hours.
The function works independently of the operation and
other time-setting options. The timer signal is different
from other signals.
12.1 Set the timer
1.
Press ⁠.
a The display shows the timer.
2.
Use ⁠ or ⁠ to set the timer duration.
3.
Press ⁠.
The timer also starts automatically after a few
seconds.
a The timer counts down.
a After a short time, the display switches back.
a If an operating mode is running, the display also
shows a timer symbol. When the appliance is
switched off, the display shows the timer duration
and a timer symbol.
a Once the timer duration has elapsed, a signal tone
sounds.
4.
Press ⁠ to end the signal tone early.
12.2 Changing the timer
1.
Press ⁠.
a The display shows the timer.
2.
Use ⁠ or ⁠ to change the timer duration.
Note:The timer remains visible on the display if the ap-
pliance is switched off.
If an operating mode is running, you can use ⁠ to se-
lect the timer. The timer duration is highlighted for a
short time. You can change the timer duration.
12.3 Cancelling the timer
▶
Reset the timer duration.
a Once this is implemented, the symbol no longer
lights up.
13 Basic settings
You can configure the basic settings for your appliance
to meet your needs.
13.1 Changing basic settings
1.
Press ⁠.
2.
Press ⁠.
3.
Use ⁠ or ⁠ to select "Settings" ⁠.
4.
Use ⁠ to navigate to the next line.
5.
Use ⁠ or ⁠ to select the setting.
6.
If required, use ⁠ to navigate to the next line.
7.
Use ⁠ or ⁠ to select the setting.
8.
Press ⁠.
9.
Select "Save" to save the setting.
Note:Your changes to the basic settings will be re-
tained even after a power failure.
13.2 Overview of the basic settings
This is where you can find an overview of the basic set-
tings and factory settings. The basic settings depend
on the features of your appliance.
Notes
¡ Changes to the language, button tone and display
brightness settings take effect immediately. All other
settings do not take effect until you save them.