Instruction manual

en Operating the appliance
10
1Operating the appliance
Oper at i ng the appl i ance You have already learnt about the controls and how
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Switching the appliance on and off
Before you are able to set the appliance, you must
switch it on.
Note: The timer can also be set when the appliance is
switched off. Some displays and notes remain visible in
the display after the appliance has been switched off.
Switch off your device when it is not being used. If no
settings are applied for a long time, the appliance
switches itself off automatically.
Switching on the appliance
Use the # touch button to switch on the appliance.
The Neff logo appears in the display, followed by the
maximum microwave output.
The appliance is ready to use.
You can find out how to set the operating modes in the
individual chapters.
Switching off the appliance
Use the # touch button to switch off the appliance.
Any functions that may be running are cancelled.
The time and date appear in the display.
Note: You can set whether the time and date should be
displayed when the device is switched off in the basic
settings. ~ "Basic settings" on page 15
Operation
Some operating steps are the same for all operating
modes. In the following, you can learn about the basic
operating steps.
Starting the operation
You must use the # touch button to start each
operation.
After the operation starts, your settings are shown in the
display.
Note: If the operation is paused due to the appliance
door being opened, the operation must be restarted
using the # touch button after the door has been
closed.
Pausing the operation
Use the # touch button to pause and restart the
operation.
Touch the # touch button to delete the settings.
Notes
■ Opening the appliance door also pauses the
operation.
■ The fan may continue to run after an operation is
paused or cancelled.
Selecting an operating mode
After the appliance is switched on, the default operating
mode is displayed. You can start this setting
immediately.
If you want to select a different operating mode, you
can find detailed descriptions of these modes in the
appropriate chapters.
The following always applies:
1. Touch the 0 touch button.
The operating modes are shown.
2. Use the ( or ) touch button to select the operating
mode.
3. Use the & touch button to navigate to the next line.
4. Use the ( or ) touch button to select the setting.
Tip: Additional settings are available, depending on
the operating mode. For each additional setting, use
the & touch button to navigate to the next lines. Use
the ( or ) touch button to select the setting.
5. Touch the # touch button.
The appliance starts the operation.
Note: If you want to leave the current setting, you can
navigate back to the operating modes level using the 0
touch button.