Instruction manual
Table Of Contents
- [en] Instruction manual
- Table of contents
- [en] Instruction manual
- ] Causes of damage 6
- 7 Environmental protection 7
- * Getting to know your appliance 9
- _ Accessories 11
- K Before using for the first time 12
- 1 Operating the appliance 13
- O Time-setting options 14
- A Childproof lock 15
- ^ Microwave 16
- Q Basic settings 18
- D Cleaning agent 19
- p Rails 21
- q Appliance door 22
- 3 Trouble shooting 24
- 4 Customer service 25
- P Programmes 26
- J Tested for you in our cooking studio 27
- ( Important safety information
- ] Causes of damage
- 7 Environmental protection
- * Getting to know your appliance
- _ Accessories
- K Before using for the first time
- Before using for the first time
- Initial use
- Setting the language
- Setting the time
- Setting the date
- 1. Use the & button to navigate to the next line.
- 2. Use the ( or ) button to select the current day.
- 3. Use the % button to return to "Day".
- 4. Use the ) button to select the next setting.
- 5. Use the & button to navigate to the next line.
- 6. Use the ( or ) button to select the current month.
- 7. Use the % button to return to "Month".
- 8. Use the ) button to select the next setting.
- 9. Use the & button to navigate to the next line.
- 10. Use the ( or ) button to select the current year.
- 11. Use the % button to return to "Year".
- 12. Use the ) button to apply the settings.
- Cleaning the cooking compartment
- 1. Remove the accessories from the cooking compartment.
- 2. Remove leftover packaging, such as polystyrene pellets, from the cooking compartment.
- 3. Before heating the appliance, wipe the smooth surfaces in the cooking compartment with a soft, damp cloth.
- 4. Use the # touch button to switch on the appliance.
- 5. Set the specified type of heating and temperature, then start the appliance operation. ~ "Setting and starting the appliance operation" on page 13
- 6. Keep the kitchen ventilated while the appliance is heating up.
- 7. Use the # touch button to switch off the appliance after the indicated cooking time.
- 8. Wait until the cooking compartment has cooled down.
- 9. Clean the smooth surfaces with soapy water and a dish cloth.
- Cleaning the accessories
- 1 Operating the appliance
- Operating the appliance
- Switching the appliance on and off
- Setting and starting the appliance operation
- 1. Touch the # touch button to switch on the appliance.
- 2. Use the ( or ) button to select the type of heating.
- 3. Use the & button to navigate to the next line.
- 4. Use the ( or ) button to select the temperature.
- 5. Touch the # touch button to start the appliance operation.
- Default values
- Heating bar
- Run time
- Displaying the current temperature
- Further information
- Changing or cancelling the appliance operation
- Heating up the appliance quickly
- Function
- Type of heating
- Place the food in the cooking compartment
- Notes
- Activating the "Rapid heating" function
- 2. Touch the # touch button to start the appliance operation.
- 3. Touch the ° touch button to activate the "Rapid heating" function.
- 4. Once the set temperature has been reached, the "Rapid heating" function switches off automatically. The ° symbol disappears from the display. Place the food in the cooking compartment.
- O Time-setting options
- Time-setting options
- Time-setting option
- Use
- Note:
- Showing and hiding the time-setting options
- Setting the timer
- Setting the cooking time
- Start delay – "Ready at"
- Checking, changing or deleting settings
- A Childproof lock
- Childproof lock
- Lock
- Activate/deactivate
- Note:
- Automatic childproof lock
- Activating
- 2. Touch the 0 touch button.
- 3. Use the ( or ) button to select the "Settings".
- 4. Use the & button to navigate to the next line.
- 5. Use the ( or ) button to select "Automatic childproof lock".
- 6. Use the & button to navigate to the next line.
- 7. Use the ( or ) button to select "Activated".
- 8. Touch the 0 touch button.
- 9. Use the & button to navigate to the next line to save the setting.
- 2. Touch the ± touch button.
- 3. Switch on the required appliance operation.
- 2. Touch the ± touch button.
- 3. Touch the 0 touch button.
- 4. Use the ( or ) button to select the "Settings".
- 5. Use the & button to navigate to the next line.
- 6. Use the ( or ) button to select "Automatic childproof lock".
- 7. Use the & button to navigate to the next line.
- 8. Use the ( or ) button to select "Deactivated".
- 9. Touch the 0 touch button.
- 10. Use the & button to navigate to the next line to save the setting.
- 11. Touch the ± touch button.
- One-time childproof lock
- ^ Microwave
- Microwave
- Cookware
- Microwave power settings
- Setting the microwave
- Note:
- 2. Touch the 0 touch button.
- 3. Use the ( or ) button to select "Microwave •".
- 4. Use the & button to open the microwave menu.
- 5. Use the ( or ) button to set the required microwave output setting.
- 6. Use the & button to navigate to the next line.
- 7. Use the ( or ) button to set the required cooking time.
- 8. Touch the # touch button to start the appliance operation.
- Changing the cooking time
- Changing the microwave output setting
- The cooking time has elapsed
- Pausing the operation
- Cancelling the operation
- Drying the appliance
- Setting the microwave to combi-mode
- 1. Touch the # touch button to switch on the appliance.
- 2. Touch the 0 touch button.
- 3. Use the ( or ) button to select "Microwave combination operation ¡".
- 4. Touch the & touch button.
- 5. Use the ( or ) touch button to set the required combination operation.
- 6. Use the & button to navigate to the next line.
- 7. Use the & button to navigate to the next line.
- 8. Touch the # touch button.
- The cooking time has elapsed
- Pausing the operation
- Cancelling the operation
- Q Basic settings
- Basic settings
- Changing the basic settings
- 1. Touch the # touch button.
- 2. Touch the 0 touch button.
- 3. Use the ( or ) button to select the "" Settings".
- 4. Use the & button to navigate to the next line.
- 5. Use the ( or ) button to select the setting.
- 6. Use the & button to navigate to the next line.
- 7. Use the ( or ) button to select the setting.
- 8. Touch the 0 touch button.
- 9. To save the setting, use the & button to select "Save".
- List of basic settings
- Setting favourites
- Note:
- 2. Touch the 0 touch button.
- 3. Use the ( or ) button to select "" Basic settings".
- 4. Use the & button to navigate to the next line.
- 5. Use the ( or ) button to select "Favourites".
- 6. Use the & button to navigate to the next line.
- 7. Use the ( or ) button to select the type of heating.
- 8. Use the & button to navigate to the next line.
- 9. Use the ( or ) button to select "Activated" or "Deactivated".
- 10. Touch the 0 touch button.
- 11. To save the setting, use the & button to select "Save".
- D Cleaning agent
- p Rails
- Rails
- Detaching and refitting the rails
- : Warning
- Detaching the rails
- Inserting the holders
- 1. The holders at the front differ from those at the rear (fig. !).
- 2. Use the hook to mount the front holder at the top into the round hole ‚, set it at a slight incline, attach it at the bottom, and straighten it ƒ (fig. ").
- 3. Use the hook to attach the rear holder into the upper hole ‚ and push it into the lower hole ƒ (fig. #).
- Attaching the rails
- q Appliance door
- Appliance door
- Removing the door cover
- 1. Open the appliance door slightly.
- 2. Press on the right and left side of the cover (fig. !).
- 3. Remove the cover (fig. "). Close the appliance door carefully
- 4. Open the appliance door again slightly. Put the cover back in place and press on it until it clicks audibly into place (fig. #).
- 5. Close the appliance door.
- Removing and fitting the door panels
- Removing the door panels from the appliance
- 1. Open the appliance door slightly.
- 2. Press on the right and left side of the cover (fig. !).
- 3. Remove the cover (fig. ").
- 4. Undo and remove the screws on the left and right of the appliance door (fig. #).
- 5. Before closing the door again, trap a tea towel that has been folded several times in the door (fig. $).
- 6. Push both retainers at the top of the intermediate panel upwards, but do not remove them (fig. %). Hold the panel with one hand. Take out the panel.
- Fitting the door panels on the appliance
- 1. Insert the intermediate panel into the retainer at the bottom and push it in firmly from the top (fig. !).
- 2. Push both retainers downwards (fig. ").
- 3. Insert the front panel downwards into the retainers (fig. #).
- 4. Close the front panel until both upper hooks are opposite the opening (fig. $).
- 5. Press the front panel down until it clicks audibly into place (fig. %).
- 6. Open the appliance door again slightly and remove the tea towel.
- 7. Screw both screws back in on the left and right.
- 8. Put the cover back in place and press on it until it clicks audibly into place (fig. &).
- 9. Close the appliance door.
- Removing the door panels from the appliance
- 3 Trouble shooting
- 4 Customer service
- P Programmes
- Programmes
- Information on the settings
- Selecting a dish
- Setting the programme
- 1. Touch the # touch button to switch on the appliance.
- 2. Touch the 0 touch button.
- 3. Use the ( or ) button to select "Microwave programmes".
- 4. Use the & button to navigate to the next line.
- 5. Use the ( or ) button to select the required microwave programme.
- 6. Use the & button to navigate to the next line.
- 7. Use the ( or ) button to set the weight.
- 8. Firstly touch the % n button to navigate upwards and then touch the ) button to navigate to the next line.
- 9. Touch the # touch button to start the appliance operation.
- Continue cooking
- Cancel
- Switching off the appliance
- J Tested for you in our cooking studio
- Tested for you in our cooking studio
- Note:
- Silicone moulds
- Baking
- Roasting and braising
- Grilling
- Convenience products
- Microwave
- Yogurt
- Preparing yogurt
- 1. Heat 1 litre of milk (3.5 % fat) to 90 °C on the hob and then cool down to 40 °C.
- 2. Stir in 150 g (chilled) yogurt.
- 3. Pour into cups or small jars and cover with cling film.
- 4. Place the cups or jars onto the cooking compartment floor and use the settings indicated in the table.
- 5. After preparation, leave the yogurt to cool in the refrigerator.
- Preparing yogurt
- Eco heating type
- Acrylamide in foodstuffs
- Drying
- Preserving
- Defrosting
- Heating food in a microwave
- Test dishes
- [en] Instruction manual
Microwave en
17
Accessories included
Only the wire rack provided is suitable when using the
microwave only. If you use the universal pan or the
baking tray, this may create sparks, which may damage
the cooking compartment.
When using the appliance in combination with the
microwave or "Dishes" mode, you can use the universal
pan, baking tray or any other accessories that have
been included with the appliance.
When using the microwave, it is best to insert
accessories at level 1, unless otherwise specified.
Microwave power settings
A variety of microwave power settings that are suitable
for different types of food and food preparation are
available.
A cooking time must always be set to operate the
microwave. You can either apply the default cooking
time or adjust it in the relevant menu.
The maximum setting is for heating liquids. After a
certain period, the microwave's power output is reduced
to below maximum to protect the appliance.After a
cooling period, the microwave's full power will be
available once more.
Setting the microwave
To achieve optimum results with the microwave, always
insert the wire rack at shelf position 1.
Note: If you use the microwave function very regularly,
you can change the "Operation after switch-on" option
in the microwave's basic settings.
1. Touch the # touch button to switch on the
appliance.
2. Touch the 0 touch button.
The main menu appears.
3. Use the ( or ) button to select "Microwave •".
4. Use the & button to open the microwave menu.
A microwave output setting and cooking time are
suggested.
5. Use the ( or ) button to set the required microwave
output setting.
6. Use the & button to navigate to the next line.
7. Use the ( or ) button to set the required cooking
time.
8. Touch the # touch button to start the appliance
operation.
The # touch button lights up red. The cooking time
counts down on the display.
Changing the cooking time
You can change the cooking time at any time during
operation by touching the ( or ) touch button.
Changing the microwave output setting
1. Touch the # touch button and reset the microwave
output setting and cooking time.
2. Touch the # touch button to start the appliance
operation.
The cooking time has elapsed
As soon as the end time has been reached, an audible
signal sounds and the appliance ends the microwave
operation automatically.
"x Finished" appears on the display.
Touch the 0 touch button to stop the audible signal.
If you want to set a new cooking time, touch the #
touch button.
Otherwise, touch the # touch button to switch off the
appliance.
Pausing the operation
Touch the # touch button to pause the oven. Press the
# touch button again to continue the operation.
Opening the appliance door interrupts the operation.
Touch the # touch button once the door has been
closed. The operation continues.
Cancelling the operation
Touch the # touch button.
Drying the appliance
After each microwave operation, use the "Dry appliance
·" operating mode. The cooking compartment is
heated up and the moisture in the cooking
compartment evaporates.
Drying the appliance takes 10 minutes and the duration
cannot be changed.
1. Open the Types of heating menu.
2. Use the ( or ) button to select "Dry appliance ·".
3. Touch the # touch button to start the appliance
operation.
The # touch button lights up red. The cooking time
counts down on the display.
Open the appliance door for a few minutes until the
cooking compartment is completely dry.
Power
settings
Food Maximum cook-
ing time
90 W For defrosting delicate foods 1 hr 30 mins
180 W For defrosting and continued cooking 1 hr 30 mins
360 W For cooking meat and heating deli-
cate foods
1 hr 30 mins
600 W For heating and cooking food 1 hr 30 mins
max. For heating liquids 30 mins