Assembly & Installation Instructions

Appliance door en
31
2.
Snap the hooks ⁠ on the left and right of the con-
densate tray into the gap ⁠.
3.
Push the condensate tray until the hooks on the
right, left and bottom click into place.
a The condensate tray is installed horizontally.
20.2 Attaching the appliance door
WARNING‒Risk of injury!
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
▶ Keep your hands away from the hinges.
When the hinges are not secured, they can snap shut
with great force.
▶ Make sure that the locking levers are always either
fully closed or (when detaching the oven door) fully
open.
1.
Slide the appliance door straight onto the two
hinges ⁠. Slide the appliance door on as far as it
will go.
2.
Open the appliance door fully.
3.
Close the locking levers on the left- and right-hand
hinges ⁠.
a The locking levers are closed. The appliance door is
secured and cannot be detached.
4.
Close the appliance door.
20.3 Removing the door panes
WARNING‒Risk of injury!
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
▶ Keep your hands away from the hinges.
Components inside the appliance door may have sharp
edges.
▶ Wear protective gloves.
1.
Open the appliance door fully.
2.
Open the locking levers on the left- and right-hand
hinges ⁠.
a The locking levers are open. The hinges are now se-
cured and cannot snap shut.
3.
Close the appliance door fully ⁠.
4.
Push on the left- and right-hand side of the door
cover from the outside ⁠ until it is released.
5.
Remove the door cover ⁠.
6.
Lift out the inner pane ⁠ and set it down carefully
on a flat surface.
7.
Lift out the intermediate pane ⁠ and set it down
carefully on a flat surface.
8.
Open the appliance door and remove the door seal.