Installation Instruction
Table Of Contents
- Steamer
- en
- Table of contents
- 1 Safety
- 2 Avoiding material damage
- 3 Environmental protection and saving energy
- 4 Familiarising yourself with your appliance
- 5 Accessories
- 6 Before using for the first time
- 7 Basic operation
- 7.1 Switching on the appliance
- 7.2 Switching off the appliance
- 7.3 Residual heat indicator
- 7.4 Filling the water tank
- 7.5 Refilling the water tank
- 7.6 Setting the heating function and temperature
- 7.7 “Fill water tank” message
- 7.8 Heat-up indicator
- 7.9 Displaying the current temperature
- 7.10 Pausing operation
- 7.11 Changing settings during operation
- 7.12 Cancelling operation
- 7.13 After using the Steam function
- 8 Time-setting options
- 9 Steam programs
- 10 Childproof lock
- 11 Basic settings
- 12 Cleaning and servicing
- 13 Troubleshooting
- 14 Disposal
- 15 How it works
- 15.1 What is the best way to proceed?
- 15.2 Good to know
- 15.3 Vegetables
- 15.4 Side dishes and pulses
- 15.5 Poultry and meat
- 15.6 Fish
- 15.7 Soup garnishes, miscellaneous
- 15.8 Desserts, compote
- 15.9 Reheating
- 15.10 Defrosting
- 15.11 Extracting juice
- 15.12 Preserving
- 15.13 Sous-vide cooking
- 15.14 Dough proving
- 15.15 Frozen products
- 15.16 Test dishes
- 16 Customer Service
- 17 Installation instructions
en Basic settings
16
11 Basic settings
You can configure the appliance to meet your needs.
11.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
Setting Selection
Language Select language
Time Set the current time
Date Set the current date
Water hardness 0 (softened)
1 (soft)
2 (moderately hard)
3 (hard)
4 (very hard)
Audible signal Short
Medium
Long
Button tone Switched off (the button
tone for the button re-
mains active even when
the button tones are de-
activated)
Switched on
Display brightness Can be adjusted to one of
five different levels
Clock display Digital
Off
Lighting Switched on during oper-
ation
Switched off during oper-
ation
Automatic childproof lock Deactivated
Activated
Setting Selection
Operating mode on start-
up
Steam
Main menu
Steam programs
Night-time dimming Off
On
Note:When night-time
dimming is switched on,
the display is dimmed
between 22:00 and
05:59.
Brand logo Display
Do not display
Fan run-on time Recommended
Minimum
Factory settings Load
11.2 Changing the basic settings
Requirement:The appliance must be switched off.
1.
Press .
2.
Press .
3.
Use the or button to select "Settings" .
4.
Use the button to navigate to the next row.
a The first basic setting will now be shown on the dis-
play.
5.
Use the or button to select the setting.
6.
Use the button to navigate to the next row.
7.
Use the or button to change the basic setting.
8.
Press .
9.
Use the button to select "Save".
a This saves the settings.
Discarding changes to the basic settings
▶
Use the button to select "Discard".
a All your changes will be discarded and not saved.
12 Cleaning and servicing
To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully.
12.1 Cleaning agents
Only use cleaning products that are suitable for the dif-
ferent surfaces on your appliance.
WARNING‒Risk of electric shock!
An ingress of moisture can cause an electric shock.
▶ Do not use steam- or high-pressure cleaners to
clean the appliance.