User's Manual

Appliance door en
21
15.4 Fitting the door panes
WARNING‒Risk of injury!
If a door pane or appliance door has not been installed
correctly, this is dangerous.
▶
Make sure that all of the door panes and the appli-
ance door have been correctly fitted before you
switch the appliance back on again.
1.
Tip:When fitting the door panes, make sure that
they are in the original order.
Insert the intermediate pane so that the arrow on
the right-hand side is pointing upwards.
2.
Check the fit of the four spacers and two seals.
‒ Place the spacers on the centre of the lines ⁠ ⁠.
‒ Secure the seals at the corners ⁠.
3.
Insert the intermediate pane with spacers and seals
in the direction of the arrow ⁠.
The arrow on the intermediate pane must line up
with the arrow on the frame ⁠.
4.
Insert the second intermediate pane without the
spacers and seals, and slide it in the direction of the
arrow until it is inserted in the frame ⁠.
The arrow on the intermediate pane must line up
with the arrow on the frame ⁠.
5.
Push down on the intermediate pane around ,
slide the retainer in at an angle and push down
until it clicks into place.
a The retainer has been inserted.
6.
Insert the inner pane into the fixing rail at an angle
towards the back ⁠ .
7.
Push the inner pane downwards until it locks into
place ⁠.