Oven [en] User manual and installation instructions B6CCG7A.
en Safety Table of contents USER MANUAL 1.2 Intended use This appliance is designed only to be built into kitchen units. Read the special installation instructions. Only a licensed professional may connect appliances without plugs. Damage caused by incorrect connection is not covered under the warranty. Only use this appliance: ¡ To prepare meals and drinks. ¡ In private households and in enclosed spaces in a domestic environment. ¡ Up to an altitude of max. 4000 m above sea level. 1 Safety ............
Safety Opening the appliance door creates a draught. Greaseproof paper may come into contact with the heating element and catch fire. ▶ Never place greaseproof paper loosely over accessories when preheating the appliance and while cooking. ▶ Always cut greaseproof paper to size and use a plate or baking tin to hold it down. WARNING ‒ Risk of burns! The appliance and its parts that can be touched become hot during use. ▶ Caution should be exercised here in order to avoid touching heating elements.
en Preventing material damage Children may breathe in or swallow small parts, causing them to suffocate. ▶ Keep small parts away from children. ▶ Do not let children play with small parts. 1.5 Halogen bulb WARNING ‒ Risk of burns! The bulbs in the cooking compartment get very hot. There is still a risk of burning for some time after they have been switched off. ▶ Do not touch the glass cover. ▶ Avoid contact with your skin when cleaning.
Environmental protection and saving energy Leaving the appliance to cool down with the door open will damage the front of neighbouring kitchen units over time. ▶ Always allow the cooking compartment to cool down with the door closed after cooking at high temperatures. ▶ Take care not to trap anything in the appliance door. ▶ Only leave the cooking compartment to dry with the door open if a lot of moisture was produced during operation.
en Familiarising yourself with your appliance 4 Familiarising yourself with your appliance 4.1 Controls 1 You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. On certain models, specific details such as colour and shape may differ from those pictured. 2 3 2 3 4 4 Buttons → "Buttons", Page 6 Function selector You can turn the function selector clockwise or anti-clockwise from the zero setting.
Familiarising yourself with your appliance Symbol Type of heating CircoTherm hot air CircoTherm gentle Pizza setting Bottom heating Full-surface grill Circo-roasting Top/bottom heating en What it's used for/how it works Bake and roast on one or more levels. The fan distributes the heat from the ring-shaped heating element in the back wall evenly around the cooking compartment. Cook selected dishes gently on one level without preheating.
en Accessories Heat-up indicator The appliance indicates when it is heating up. When the appliance is heating, the symbol lights up on the display. When you are preheating the appliance, the optimal time to place your food in the cooking compartment is when the symbol first goes out. Notes ¡ The heat-up indicator only appears for types of heating for which a temperature is set. It does not appear for grill settings, for example.
Before using for the first time 5.1 Locking function The locking function prevents the accessories from tilting when they are pulled out. You can pull out the accessories approximately halfway without them tipping. The accessories must be inserted into the cooking compartment correctly for the tilt protection to work properly. 5.2 Sliding accessories into the cooking compartment Always slide accessories into the cooking compartment correctly.
en Basic operation 3. Keep the room ventilated while the appliance is 5. Switch off the appliance after the specified cooking heating. 4. Set the type of heating and temperature. → "Basic operation", Page 10 6. Wait until the cooking compartment has cooled Type of heating Temperature Cooking time CircoTherm hot air time. down. 7. Clean the smooth surfaces with soapy water and a dish cloth. 8. Clean the accessories using soapy water and a dish Maximum 1 hour cloth or soft brush.
Time-setting options en 9 Time-setting options Your appliance has different time-setting options, with which you can control its operation. 9.1 Overview of the time-setting options With the tions. button, select the different time-setting op- Time-setting option Timer Cooking time End time Time Use The timer can be set independently of the appliance when it is in operation. It does not affect the appliance.
en Childproof lock Requirements ¡ The type of heating and temperature or setting are set. ¡ A cooking time is set. 1. Press the button repeatedly until is highlighted in the display. 2. Press the or button. a The display shows the calculated end time. 3. Use the or button to delay the end time. a After a few seconds, the appliance applies the setting and the display shows the set end time.
Basic settings en 11 Basic settings You can configure the appliance to meet your needs. 11.1 Overview of the basic settings Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features of your appliance.
en Cleaning and servicing 12 Cleaning and servicing To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully. 12.1 Cleaning products In order to avoid damaging the various oven surfaces on the appliance, do not use unsuitable cleaning products. WARNING ‒ Risk of electric shock! An ingress of moisture can cause an electric shock. ▶ Do not use steam- or high-pressure cleaners to clean the appliance.
Cleaning function en Cooking compartment Area Enamel surfaces Suitable cleaning agents ¡ Hot soapy water ¡ Vinegar water ¡ Oven cleaner Glass cover for the oven light Rails ¡ Hot soapy water AccessorIes ¡ Hot soapy water ¡ Oven cleaner ¡ Hot soapy water Information Soak any heavily soiled areas and use a brush or steel wool. Leave the appliance door open to dry the cooking compartment after cleaning it. Tip: It is best to use the cleaning function.
en Cleaning function The outside of the appliance gets very hot when the cleaning function is in progress. ▶ Never hang combustible objects, e.g. tea towels, on the door handle. ▶ Leave the front of the appliance clear. ▶ Keep children at a safe distance. If the door seal is damaged, a large amount of heat is generated around the door. ▶ Do not scrub or remove the seal. ▶ Never operate the appliance if the seal is damaged or missing. 1. Remove accessories and cookware from the cook2. 3. 4. 5.
Shelf supports 2. ATTENTION! Distilled water in the cooking compartment leads to corrosion. ▶ Do not use distilled water. Mix 0.4 litres water with a drop of washing-up liquid and pour into the centre of the cooking compartment floor. 3. Use the function selector and the temperature selector to set the cleaning aid . a The length of time appears in the display. a The cleaning aid starts after a few seconds. The duration counts down in the display.
en Appliance door 15 Appliance door To ensure that your appliance retains its appearance and remains fully functioning for a long time, you can detach the appliance door and clean it. 3. Open the appliance door approx. 45° wide. WARNING ‒ Risk of injury! If the hinges are not secured due to an incomplete lock, they can snap shut with great force. ▶ To detach or attach the appliance door, always turn the two locks as far as they will go.
Appliance door 5. ATTENTION! Opening and closing the appliance door when it is in the lock position damages the door hinges. ▶ Never force the appliance door open or closed. ▶ If the door hinge has been damaged, call the after-sales service. Move the appliance door up and down until you hear a quiet click. You can still only move the appliance door slightly. en 15.2 Attaching the appliance door 1. Tip: Ensure that the appliance door is not wedged at an angle and that it is properly fitted in place.
en Appliance door 5. WARNING ‒ Risk of injury! If the door locks are unsecured, the appliance door may become detached. ▶ After attaching the appliance door, close the leftand right-hand door locks. Hold the screwdriver horizontally and use it to push the door lock (black component) on each side of the door downwards as far as it will go . 4. Push down on the intermediate pane in the area of , and carefully lift the retainer to pull it out. until you are able 5.
Appliance door en 5. Push down on the intermediate pane around 15.4 Fitting the door panes WARNING ‒ Risk of injury! If a door pane or appliance door has not been installed correctly, this is dangerous. ▶ Make sure that all of the door panes and the appliance door have been correctly fitted before you switch the appliance back on again. , slide the retainer in at an angle and push down until it clicks into place. 1. Tip: When fitting the door panes, make sure that they are in the original order.
en Troubleshooting 16 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting aftersales service. This will avoid unnecessary costs. WARNING ‒ Risk of injury! Improper repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ If the appliance is defective, call Customer Service. WARNING ‒ Risk of electric shock! Incorrect repairs are dangerous.
Disposal en Fault Cause and troubleshooting A message with ap- Electronics fault pears in the display, 1. Press the button. e.g. - . ‒ If required, reset the time. a If the fault was a one-off, the error message disappears. 2. If the error message appears again, call the after-sales service. Quote the exact error message and the E no. of your appliance. → "Customer Service", Page 24 16.2 Replacing the oven light bulb 1.
en Customer Service 18 Customer Service If you have any queries on use, are unable to rectify faults on the appliance yourself or if your appliance needs to be repaired, contact Customer Service. Function-relevant genuine spare parts according to the corresponding Ecodesign Order can be obtained from Customer Service for a period of at least 10 years from the date on which your appliance was placed on the market within the European Economic Area.
How it works Roasting and grilling on the wire rack Roasting on the wire rack works particularly well for large poultry or for multiple pieces at the same time. ¡ Depending on the size and type of the food to be roasted, add up to 1/2 litre water to the universal pan. You can make a sauce from the juices that are caught. This also means that less smoke is produced and the cooking compartment becomes less dirty. ¡ Keep the appliance door closed when using the grill. Never grill with the appliance door open.
en How it works Food Accessories/cookware Victoria sponge cake, 2 levels 4 pcs Ø 20 cm cake tin Baking sheet on wire rack Cookware without lid Cookware without lid Cookware without lid Biscuits, 2 or 3 levels Beef, top side/top rump Lamb leg (on the bone) Pork belly Chicken, whole Turkey, crown Turkey, whole, 4–8 kg Fish, braised, whole 300 g, e. g.
How it works 19.6 Test dishes These overviews have been produced for test institutes to facilitate appliance testing in accordance with EN 60350-1. Baking Observe this information when baking test dishes. General information ¡ The settings apply to food that is placed into a cold cooking compartment. ¡ Observe the notes about preheating in the tables. These setting values apply without rapid heating. ¡ When baking, use the lower of the listed temperatures to begin with.
en Installation instructions Recommended settings for grilling Food Accessories/cookware Shelf pos- Type of ition heating Toasting bread 1 Do not preheat the appliance. Wire rack 4 Temperature in Cook°C/grill setting ing time in mins / 1 5–6 20 Installation instructions Observe this information when installing the appliance. ¡ The mains socket for the appliance must either be located in the hatched area or outside of the area where the appliance is installed.
Installation instructions en 20.2 Appliance dimensions 20.3 Installation below a worktop You will find the dimensions of the appliance here Observe the installation dimensions and the installation instructions when installing below a worktop. ¡ To ventilate the appliance, the intermediate floor must have a ventilation cut-out. ¡ In combination with induction hobs, the gap between the worktop and appliance must not be sealed using additional strips. ¡ The worktop must be secured to the built-in unit.
en Installation instructions 20.5 Installation in a tall unit Observe the installation dimensions and the installation instructions when installing in a tall unit. ¡ The power cable must be plugged in at the rear of the appliance until you hear a clicking sound. A 3 m power cable can be obtained from the after-sales service. ¡ The power cable must only be replaced with a cable from the original manufacturer. This is available from after-sales service.
Installation instructions 1. If required, you can adjust the gap between the ap- pliance door and the panels using the adjustment screws on the left and right. Turning the screws clockwise makes the gap larger Turning the screws anti-clockwise makes the gap smaller 2. Push the appliance in fully. Do not kink or trap the connection cable, or route it over sharp edges. 3. Centre the appliance. en 6.
en Installation instructions 9. Open the appliance door slightly, then refit the pan- els and screw them in place, first at the top and then at the bottom. Note: The gap between the worktop and the appliance must not be closed by additional battens. Thermal insulation strips must not be fitted to the side panels of the surround unit. 20.9 Removing the appliance 1. Disconnect the appliance from the power supply. 2. Undo the fastening screws. 3. Lift the appliance slightly and pull it out completely.
Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd.
