Installation Instruction

Troubleshooting en
29
5.
Push down on the intermediate pane around ,
slide the retainer in at an angle and push down
until it clicks into place.
a The retainer has been inserted.
6.
Insert the inner pane into the fixing rail at an angle
towards the back ⁠ .
7.
Push the inner pane downwards until it locks into
place ⁠.
19 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-
sales service. This will avoid unnecessary costs.
WARNING‒Risk of injury!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
If the appliance is defective, call Customer Service.
WARNING‒Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
Only use genuine spare parts when repairing the
appliance.
▶
If the power cord of this appliance is damaged, it
must be replaced by trained specialist staff.
19.1 Malfunctions
Fault Cause and troubleshooting
The appliance is not
working.
The circuit breaker is faulty.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other appliances are working.
The appliance does
not heat up;
lights up in the dis-
play.
Demo mode is activated.
1.
Briefly disconnect the appliance from the power supply by switching the circuit breaker in
the fuse box off and back on again.
2.
Deactivate demo mode within fiveminutes by changing the basic setting ⁠ ⁠ to .
→"Basic settings", Page18
Steam-assisted oper-
ation does not start.
The water tank is empty.
▶
Fill the water tank.
→"Filling the water tank", Page13