Installation Instruction

Steam en
13
8.1 Steam-assisted cooking
When you cook with steam assistance, the appliance
introduces steam into the cooking compartment at vari-
ous intervals. This gives your food a crispy crust and a
shiny surface. Meat stays juicy, tender and only under-
goes a minimum reduction in volume.
Starting steam-assisted cooking
Tip:Use the programmes or the settings in the tables.
1.
Fill the water tank.
→"Filling the water tank", Page13
2.
Set a suitable type of heating:
– CircoTherm hot air
– Top/bottom heating
– Circo-roasting
– Bread baking setting ⁠
3.
Set a temperature between 80and 240°C.
4.
Use the button to set the steam intensity.
Intensity Setting
Low
High
a The appliance starts to heat and produce steam
after a few seconds.
Cancelling steam-assisted cooking
▶
Press the button repeatedly until the steam in-
tensity goes out in the display.
a The appliance continues to operate but without
steam assistance.
→"After every steam operation", Page14
Ending steam-assisted cooking
1.
Switch off the appliance.
2.
Empty the water tank and dry the cooking compart-
ment.
→"After every steam operation", Page14
8.2 Reheating
With the "Reheating" type of heating, you can gently
reheat food that has already been cooked or crisp up
day-old baked goods. The appliance switches the
steam onautomatically.
Starting reheating
Requirement:The cooking compartment has cooled
down.
1.
Fill the water tank.
→"Filling the water tank", Page13
2.
Set the regeneration type of heating.
3.
Set the temperature.
a The appliance starts to heat and produce steam
after a few seconds.
Ending reheating
1.
Switch off the appliance.
2.
Empty the water tank and dry the cooking compart-
ment.
→"After every steam operation", Page14
8.3 Filling the water tank
WARNING‒Risk of fire!
Due to the hot surfaces, vapours from flammable li-
quids may catch fire in the cooking compartment (ex-
plosion). The appliance door may spring open. Hot
steam and jets of flame may escape.
▶
Do not pour flammable liquids (e.g. alcoholic drinks)
into the water tank.
▶
Only fill the water tank with water or with the descal-
ing solution we have recommended.
WARNING‒Risk of burns!
The water tank may heat up while the appliance is in
operation.
▶
Wait until the water tank has cooled down from the
previous operation.
▶
Remove the water tank from the tank recess.
Requirement:The water hardness has now been set
correctly.
→"Setting the water hardness", Page20
1.
Press on the water tank and pull the water tank
out ⁠.
2.
Press on the water tank lid and unscrew it ⁠.
3.
Fill the water tank with water up to the mark ⁠.
4.
Press on the water tank lid and screw it on ⁠.