Installation instructions
Table Of Contents
- Oven
- en
- Table of contents
- 1 Safety
- 2 Preventing material damage
- 3 Environmental protection and saving energy
- 4 Familiarising yourself with your appliance
- 5 Accessories
- 6 Before using for the first time
- 7 Basic operation
- 8 Time-setting options
- 9 Childproof lock
- 10 Rapid heating
- 11 Sabbath mode
- 12 Basic settings
- 13 Cleaning and servicing
- 14 Cleaning functions
- 15 Shelf supports
- 16 Appliance door
- 17 Troubleshooting
- 18 Disposal
- 19 Customer Service
- 20 How it works
- 21 Installation instructions
- 21.1 General installation instructions
- 21.2 Appliance dimensions
- 21.3 Installation below a worktop
- 21.4 Installing below a hob
- 21.5 Installation in a tall unit
- 21.6 Installing two appliances on top of each other
- 21.7 Corner installation
- 21.8 Electrical connection
- 21.9 Installing the appliance
- 21.10 Removing the appliance
en Installation instructions
30
WARNING‒Risk of fire!
It is dangerous to use an extended power
cord and non-approved adapters.
▶ Do not use multiple socket strips.
▶ Only use extension cables that are certified,
have a minimum cross section of 1.5mm²
and comply with the applicable national
safety requirements.
▶ If the power cord is too short, contact cus-
tomer service.
▶ Only use adapters approved by the manu-
facturer.
ATTENTION!
Carrying the appliance by the door handle
could break it. The door handle cannot sup-
port the weight of the appliance.
▶ Do not carry or hold the appliance by the
door handle.
21.2 Appliance dimensions
You will find the dimensions of the appliance here
21.3 Installation below a worktop
Observe the installation dimensions and the installation
instructions when installing below a worktop.
¡ To ventilate the appliance, the intermediate floor
must have a ventilation cut-out.
¡ In combination with induction hobs, the gap
between the worktop and appliance must not be
sealed using additional strips.
¡ The worktop must be secured to the built-in unit.
¡ Observe any available installation instructions for the
hob.
21.4 Installing below a hob
If the appliance is installed below a hob, the following
minimum dimensions must be adhered to (including
substructure, if applicable).
The minimum worktop thickness is based on the re-
quired minimum clearance .
Hob type a raised in mm a flush in mm b in mm
Induction hob 37 38 5