Installation instructions

Appliance door en
33
5.
WARNING‒Risk of injury!
If the door locks are unsecured, the appliance door
may become detached.
▶ After attaching the appliance door, close the left-
and right-hand door locks.
Hold the screwdriver horizontally ⁠ and use it to
push the door lock (black component) on each side
of the door downwards as far as it will go ⁠.
a The door lock is closed.
21.3 Removing the door panes
To facilitate cleaning, you can remove the door pane.
WARNING‒Risk of injury!
Components inside the appliance door may have sharp
edges.
▶ Wear protective gloves.
Requirements
¡ Have a screwdriver ready.
¡ The appliance door is detached.
1.
Lay the appliance door with the front side facing
down on a flat surface that is soft and clean.
2.
Undo and remove the left- and right-hand screws on
the appliance door.
3.
Carefully lift the inner pane upwards at an angle ⁠
and remove the holder ⁠ ⁠.
4.
Carefully lift the inner pane upwards at an angle and
remove it in the direction of the arrow ⁠.
5.
Slide the screwdriver in between the metal tab ⁠
and the plastic.
6.
Use the screwdriver to lift ⁠ the reflector ⁠ until it
disengages, then lift it up and pull it out ⁠.
7.
Remove the second reflector in the same way as
the first.
8.
Push down on the intermediate pane lightly around
⁠, and carefully lift the retainer ⁠ until you are able
to pull it out.