User's Manual

Troubleshooting en
29
5.
Push down lightly on the first intermediate pane
around , slide the retainer in at an angle and
push down until it clicks into place.
a The retainer has been inserted.
6.
ATTENTION!
The light transmission is lower due to the glass rod
being held.
▶
Do not touch the glass rod with your bare hands.
▶
Clean the glass rod with glass cleaner before in-
serting it.
Select the left-hand reflector and insert it at the
top.
7.
Insert the reflector and click it into place in the
gap ⁠.
8.
Insert the second reflector in the same way as the
first.
9.
Use glass cleaner to remove any finger marks from
the reflectors if necessary.
10.
Insert the inner pane into the fixing rail at an angle
towards the back ⁠ .
11.
Push the inner pane from above until it locks into
place ⁠.
20 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING‒Risk of injury!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
If the appliance is defective, call Customer Service.
WARNING‒Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
Only use genuine spare parts when repairing the
appliance.
▶
If the power cord of this appliance is damaged, it
must be replaced by trained specialist staff.