Assembly & Installation Instructions

en Basic operation
12
6.2 Initial use
When the appliance is connected to the power supply
for the first time or following a lengthy power failure, the
settings that you will need to configure before you can
use it will appear.
Notes
¡ You can change these settings at any time by going
to the basic settings.
→"Basic settings", Page20
¡ You can also use HomeConnect to configure the
settings. If your appliance is connected, follow the
instructions in the app.
Setting the language
1.
Connect the appliance to the power supply.
a The first setting will appear after a few seconds.
2.
Use the ⁠button to navigate to the bottom row.
3.
Use the ⁠ or ⁠button to select the language.
4.
Use the ⁠button to navigate back to the top row.
5.
Use the ⁠button to select the next setting.
Setting the time
1.
Use the ⁠button to navigate to the bottom row.
2.
Use the ⁠ or ⁠button to select the correct hour.
3.
Use the ⁠button to navigate to the next row.
4.
Use the ⁠ or ⁠button to select the correct number of
minutes.
5.
Use the ⁠button to navigate back to the top row.
6.
Use the ⁠button to select the next setting.
Setting the date
1.
Use the ⁠button to navigate to the next row.
2.
Use the ⁠ or ⁠button to select the correct day.
3.
Use the ⁠button to navigate to the next row.
4.
Use the ⁠ or ⁠button to select the correct month.
5.
Use the ⁠button to navigate to the next row.
6.
Use the ⁠ or ⁠button to select the correct year.
7.
Press the ⁠button repeatedly until "Date" appears.
8.
Use the ⁠button to apply the settings.
Setting the water hardness
1.
Use the ⁠button to navigate to the bottom row.
2.
Use the ⁠ or ⁠button to select the water hardness
range.
→"Before using for the first time", Page11
3.
Use the ⁠button to navigate back to the top row.
4.
Use the ⁠button to save your settings.
5.
Open and close the appliance door once.
a The appliance will perform a self-test, after which it
will be ready to use.
a Initial configuration is now complete.
6.3 Cleaning the appliance
Before using the appliance to cook food for the first
time, you must clean the cooking compartment and ac-
cessories.
1.
Remove the product information, accessories and
any leftover packaging (e.g. polystyrene pellets)
from the cooking compartment.
2.
Wipe the smooth surfaces in the cooking compart-
ment with a soft, damp cloth.
3.
Press ⁠ to switch the appliance on.
→"Switching on the appliance", Page12
4.
Fill the water tank.
→"Filling the water tank", Page13
5.
Set the required heating function, temperature and
steam assistance for the heat-up process and press
⁠ to start.
→"Setting the type of heating and temperature",
Page13
→"Steam-assisted cooking", Page15
Heating up
Heating function CircoTherm hot air ⁠
with steam
assistance ⁠, steam in-
tensity "High"
Temperature Maximum
Cooking time 1hour
6.
Keep the kitchen ventilated while the appliance is
heating.
7.
Press ⁠ to switch off the appliance after 1hour.
→"Switching off the appliance", Page12
8.
Allow the appliance to cool down.
9.
Clean the smooth surfaces with soapy water and a
dish cloth.
10.
Empty the water tank and dry the cooking compart-
ment.
→"After every steam operation", Page15
11.
Thoroughly clean any accessories you used with
soapy water and a dish cloth.
7 Basic operation
7.1 Switching on the appliance
▶
Press ⁠ to switch the appliance on.
Notes
¡ In the basic settings, you can specify whether the
heating functions or the main menu should appear
when you switch on the appliance.
→"Basic settings", Page20
¡ If you do not perform any actions on the appliance
for an extended period, it will automatically switch it-
self off.
7.2 Switching off the appliance
▶
Press ⁠ to switch the appliance off.
Notes
¡ The residual heat indicator will appear on the dis-
play while the cooking compartment is still hot.
→"Residual heat indicator", Page13
¡ The cooling fan will continue to run until the cooking
compartment has cooled down.
→"Cooling fan", Page9