Oven [en] User manual and installation instructions B57CR22G0B
en Safety Table of contents USER MANUAL 1.2 Intended use This appliance is designed only to be built into kitchen units. Read the special installation instructions. Only a licensed professional may connect appliances without plugs. Damage caused by incorrect connection is not covered under the warranty. Only use this appliance: ¡ To prepare meals and drinks. ¡ In private households and in enclosed spaces in a domestic environment. ¡ Up to an altitude of max. 4000 m above sea level. 1 Safety ............
Safety Opening the appliance door creates a draught. Greaseproof paper may come into contact with the heating element and catch fire. ▶ Never place greaseproof paper loosely over accessories when preheating the appliance and while cooking. ▶ Always cut greaseproof paper to size and use a plate or baking tin to hold it down. WARNING ‒ Risk of burns! The appliance and its parts that can be touched become hot during use. ▶ Caution should be exercised here in order to avoid touching heating elements.
en Preventing material damage Children may breathe in or swallow small parts, causing them to suffocate. ▶ Keep small parts away from children. ▶ Do not let children play with small parts. 1.5 Cleaning function WARNING ‒ Risk of fire! Loose food remnants, fat and meat juices may catch fire when the cleaning function is in progress. ▶ Before starting the cleaning function, always remove the worst of the food residues and remnants from the cooking compartment and accessories.
Environmental protection and saving energy Fruit juice dripping from the baking tray leaves stains that cannot be removed. ▶ When baking very juicy fruit flans, do not pack too much on the baking tray. ▶ If possible, use the deeper universal pan. Using oven cleaner in a hot cooking compartment damages the enamel. ▶ Never use oven cleaner in the cooking compartment when it is still warm. ▶ Remove all food remnants from the cooking compartment and the appliance door before you next heat up the appliance.
en Familiarising yourself with your appliance 4 Familiarising yourself with your appliance 4.1 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. 1 2 1 Display 3 2 2 3 Buttons Control element 4.2 Buttons The buttons are touch-sensitive areas. To select a function, press the corresponding button.
Familiarising yourself with your appliance Button Name Right Use Navigate to the right on the display Up Navigate upwards on the display Down Navigate downwards on the display en 4.4 Main menu The main menu provides an overview of your appliance's functions. Press the button to open the main menu.
en Accessories Symbol Heating function Top/bottom heating eco Temperature 50 - 275 °C CircoTherm eco 40 - 200 °C Use For gently cooking selected types of food. Heat is emitted from above and below. This heating function is most effective between 150 and 250 °C. This heating function is used to measure the energy consumption in the standard mode. For gently cooking selected types of food on one level without preheating.
Accessories Accessories Wire rack Universal pan Accessory support 5.1 Locking function The locking function prevents the accessories from tilting when they are pulled out. You can pull out the accessories approximately halfway without them tipping. The accessories must be inserted into the cooking compartment correctly for the tilt protection to work properly. 5.2 Sliding accessories into the cooking compartment Always slide the accessory into the cooking compartment the right way round.
en Before using for the first time 6 Before using for the first time Configure the settings for initial start-up. Clean the appliance and accessories. 11. Use the button to navigate back to the top row. 12. Open and close the appliance door once. 6.1 Initial use a The appliance will perform a self-test, after which it will be ready to use. a Initial configuration is now complete.
Time-setting options 2. Use the or button to select the required heating 3. 4. 5. a a 6. function. Use the button to navigate to the next row. Use the or button to select the required temperature or setting. Press to start. The cooking time will appear on the display. The heat-up indicator bar visualises the rising temperature. When the food is ready, press to switch the appliance off. 7.5 Changing the temperature You can also change the temperature once you have started the appliance. 1.
en Childproof lock time (duration) and specify when you want your food to be ready. You can only use the delayed start function in conjunction with a heating function. 8.3 Cooking time Once the set cooking time has elapsed, the appliance switches off automatically. You can only use the cooking time in conjunction with a heating function. Setting the Ready at time for delayed starts Notes ¡ Do not leave food that spoils easily in the cooking compartment for too long.
Rapid heat-up en 9.3 Interrupting the automatic childproof lock 1. Press and hold the button until "Childproof lock deactivated" appears on the display. 2. Press to switch the appliance on and then start it up. 9.4 Deactivating the automatic childproof lock 1. Press and hold the 2. 3. 4. 5. 6. 7. 8. 9. button until "Childproof lock deactivated" appears on the display. Press to switch the appliance on. Press . Use the or button to select "Settings" . Use the button to navigate to the next row.
en Sabbath mode 11 Sabbath mode You can set a cooking time of up to 74 hours using Sabbath mode. You can use top/bottom heating to keep food warm between 85 °C and 140 °C during this time without having to switch the appliance on or off. 11.1 Starting Sabbath mode Notes ¡ If you open the appliance door during operation, the appliance stops heating. When you close the appliance door, the appliance continues to heat again.
Cleaning and servicing en 12.3 Changing your favourites 7. Use the or button to select the required heating In Favourites, you can set the heating functions that you want to appear in the heating functions menu. Note: Some heating functions cannot be deactivated: ¡ CircoTherm hot air ¡ Circo-roasting ¡ Full-surface grill 8. Use the button to navigate to the next row. 9. Use the or button to select a setting. 1. 2. 3. 4. 5. 6. Press to switch the appliance on. Press .
en Cleaning and servicing Area Door cover Stainless steel interior door frame Door handle Door seal Suitable cleaning agents ¡ Made of stainless steel: Stainless steel cleaner ¡ Made of plastic: Hot soapy water Stainless steel cleaner ¡ Hot soapy water ¡ Hot soapy water Information Do not use glass cleaner or a glass scraper. Do not use stainless steel care products. Tip: Remove the door cover for thorough cleaning. → "Appliance door", Page 19 Discolouration can be removed using stainless steel cleaner.
Cleaning functions en 14 Cleaning functions You can use the cleaning functions to clean the appliance. Note: The vertical bar must be to the front of the accessory supports. 14.1 Self-cleaning function The "Self-cleaning" function cleans the cooking compartment virtually automatically. Use this cleaning function to clean the cooking compartment every 2 to 3 months. You can use the cleaning function more often, if required. The cleaning function requires approx. 2.5 - 4.7 kilowatt hours.
en Cleaning functions Cleaning setting 1 2 3 a 6. a a a 7. 8. Cleaning level Low Medium High Duration in hours Approx. 1:15 Approx. 1:30 Approx. 2:00 Select a higher cleaning setting if the cooking compartment is particularly dirty or has not been cleaned for a while. You cannot change the duration of the cleaning function. Once the cleaning function is in progress, you cannot change the cleaning setting. The duration of the cleaning setting will appear on the display.
Rails en 15 Rails To thoroughly clean the rails and the cooking compartment, or to replace the rails, you can remove the rails. 15.1 Detaching the rails WARNING ‒ Risk of burns! The shelf supports get very hot ▶ Never touch the shelf supports when hot. ▶ Always allow the appliance to cool down. ▶ Keep children at a safe distance. 1. Lift the rail forwards slightly and detach it . 2. Pull the whole rail to the front and remove it. 15.2 Attaching the rails Notes ¡ The rails only fit on the right or left.
en Appliance door 2. Hold the screwdriver horizontally and use it to push the door lock (black component) on each side of the door upwards as far as it will go . 4. Insert the coin in the gap in the lock and rotate as far as it will go . ‒ Turn the lock on the left-hand side in a clockwise direction. ‒ Turn the lock on the right-hand side in an anticlockwise direction. Door lock open Left-hand lock secured The arrows point to each other Door lock closed Left-hand lock released 3.
Appliance door 6. WARNING ‒ Risk of injury! The appliance door has a weight of 7–10 kg and may fall if it is not handled carefully. ▶ Handle the appliance door carefully. The door handle is not suitable for carrying the appliance door. The door handle may break off. ▶ Never carry the appliance door by the door handle. ▶ Grab hold of the appliance door with both hands on the left and right to carry it.
en Appliance door 6. Remove the spacers 16.3 Removing the door panes and seals for cleaning, if required. To facilitate cleaning, you can remove the door pane. WARNING ‒ Risk of injury! Components inside the appliance door may have sharp edges. ▶ Wear protective gloves. Requirement: The appliance door is detached. 1. Lay the appliance door with the front side facing down on a flat surface that is soft and clean. 2.
Troubleshooting 2. Check the fit of the four spacers and two seals. ‒ ‒ Place the spacers on the centre of the lines Secure the seals at the corners . en 5. Push down lightly on the first intermediate pane . 3. Insert the intermediate pane with spacers and seals around , slide the retainer in at an angle and push down until it clicks into place. a The retainer has been inserted. in the direction of the arrow . The arrow on the intermediate pane must line up with the arrow on the frame . 4.
en Troubleshooting 17.1 Malfunctions Fault The appliance is not working. Cause and troubleshooting The circuit breaker is faulty. ▶ Check the circuit breaker in the fuse box. There has been a power cut. ▶ Check whether the lighting in your kitchen or other appliances are working. "Language English" There has been a power cut. appears on the dis▶ Configure the initial configuration settings. play. → "Initial use", Page 10 "-H-" or "-h-" appears Cooking compartment too hot for operating mode.
Disposal Fault A message with "D" or "E" appears in the display, e.g. D0111 or E0111. The cooking result is not satisfactory. en Cause and troubleshooting The electronics have detected a fault. 1. Switch the appliance off and on again. a If the fault was a one-off, the message disappears. 2. If the message appears again, call the after-sales service. Please specify the exact error message when calling. → "Customer Service", Page 25 Settings were unsuitable. Setting values, e.g.
en How it works 20 How it works Here, you can find the ideal settings for various types of food as well as the best accessories and cookware. We have perfectly tailored these recommendations to your appliance. 20.1 General cooking tips Please take note of the following information when cooking all types of food. ¡ The temperature and cooking time depend on the amount of food and the recipe. Settings ranges are specified for this reason. Try using the lower values to start with.
How it works ¡ Glass cookware is best. ¡ Follow the manufacturer's instructions for your roasting dishes. Roasting in uncovered cookware ¡ Use a deep roasting dish. ¡ If you do not have any suitable cookware, you can use the universal pan. Roasting in covered cookware ¡ Use a suitable lid that seals well. ¡ When roasting meat, there should be at least 3 cm between the food and the lid. The meat may expand. WARNING ‒ Risk of scalding! Very hot steam may escape when the lid is opened after cooking.
en How it works Food Accessory/cookware Shelf pos- Heating ition function → Page 7 Dark coated quiche 3 tin Loaf tin, 1 x 900 g or 2 2 x 450 g Loaf tin, 1 x 900 g or 2 2 x 450 g Loaf tin, 1 x 900 g or 2 2 x 450 g Baking tray 3 Baking tray 3 12-cup-tin 3 Baking tray 3 12-cup-tin 3 Baking tray 3 Pizza tray 2 4 pcs 3+1 Baking tin, dia.
How it works en 20.6 Special cooking methods and other applications 2. Heat 1 litre of whole milk (3.5% fat) to 90 °C on the Information and recommended settings for special cooking methods and other applications, e.g. slow cooking or preserving. 3. 4. Yoghurt 5. 6. Use your appliance to make yoghurt. 7. Making yoghurt 1. Remove the accessories and shelves from the cooking compartment. 8. hob and then leave it to cool down to 40 °C. It is sufficient to heat UHT milk to 40 °C.
en How it works Defrosting You can defrost frozen food in your appliance. Tips for defrosting food ¡ You can use the appliance to defrost frozen fruit, vegetables or baked goods. ¡ It is better to defrost poultry, meat and fish in the refrigerator. ¡ Remove frozen food from its packaging before you defrost it. ¡ The recommended settings are for freezer-temperature food (-18 °C).
Installation instructions Food Hot water Hot water Hot water 2 levels 1 Preheat 2 Preheat Accessory/cookware Shelf pos- Heating ition function → Page 7 sponge cake Springform cake tin, 2 diameter 26 cm sponge cake Springform cake tin, 2 diameter 26 cm sponge cake, on Springform cake tin, 3+1 diameter 26 cm the appliance for five minutes. Do not use the rapid heating function. the appliance. Do not use the rapid heating function.
en Installation instructions WARNING ‒ Danger: Magnetism! Permanent magnets are used in the control panel or in the controls. They may affect electronic implants, e.g. pacemakers or insulin pumps. ▶ Wearers of electronic implants must stay at least 10 cm away from the control panel or controls during the installation. WARNING ‒ Risk of fire! It is dangerous to use an extended power cord and non-approved adapters. ▶ Do not use multiple socket strips.
Installation instructions Hob type Full-surface induction hob Gas hob Electric hob a raised in mm 47 27 27 21.5 Installation in a tall unit Observe the installation dimensions and the installation instructions when installing in a tall unit. a flush in mm 48 38 30 en b in mm 5 5 2 ¡ The appliance must be disconnected from the power supply whenever installation work is being carried out. ¡ The appliance must only be connected using the power cable provided.
en Installation instructions 1. If required, you can adjust the gap between the ap- pliance door and the panels using the adjustment screws on the left and right. Turning the screws clockwise makes the gap larger Turning the screws anti-clockwise makes the gap smaller 2. Push the appliance in fully. Do not kink or trap the connection cable, or route it over sharp edges. 3. Centre the appliance. 6.
Installation instructions en 9. Open the appliance door slightly, then refit the pan- els and screw them in place, first at the top and then at the bottom. Note: The gap between the worktop and the appliance must not be closed by additional battens. Thermal insulation strips must not be fitted to the side panels of the surround unit. 21.9 Removing the appliance 1. Disconnect the appliance from the power supply. 2. Open the appliance door slightly and unscrew the left and right-hand panels. 3.
Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd.
