Installation Instruction

en Childproof lock
12
9 Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
Notes
¡
You can go to the basic settings →Page12 to
specify whether you want the option to set the child-
proof lock.
¡ After a power cut, the childproof lock is deactivated.
You can use the childproof lock to lock the control ele-
ments of the appliance only.
9.1 Automatic childproof lock
When the appliance is switched off, it locks automatic-
ally. You need to pause the automatic childproof lock
before you switch on the appliance.
You can activate and deactivate the automatic child-
proof lock in the basic settings.
→"Basic settings", Page12
Pausing the automatic childproof lock
Requirement:The automatic childproof lock is activ-
ated in the basic settings.
→"Basic settings", Page12
▶
Press and hold the button until goes out on
the display.
10 Rapid heating
To save time, you can use rapid heat-up to shorten the
preheat time.
Only use rapid heat-up when a temperature of over
100°C has been set.
After rapid heat-up, it is best to use the following types
of heating:
¡ CircoTherm hot air
10.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
1.
Use the function selector to select rapid heating ⁠.
2.
Use the temperature selector to set the required
temperature.
a Rapid heating starts after a few seconds.
a When the rapid heating process ends, an audible
signal sounds and the heating indicator goes out.
3.
Use the function selector to set a suitable type of
heating.
4.
Place the food in the cooking compartment.
11 Basic settings
You can configure the appliance to meet your needs.
11.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display Basic setting Selection
Automatic childproof lock
→"Childproof lock", Page12
= no
1
= yes
2
Time display = hide the time
= display the time
1
Signal duration upon completion of a cook-
ing time or timer period
= 10 seconds
= 30 seconds
1
= 2 minutes
Button tone when pressing a button = off
= on
1
1
Factory setting (may vary according to model)
2
Only possible if has been set
3
Only for appliance types with steam function