Installation instructions

en Basic settings
24
7.
Press ⁠ to start Sabbath mode.
a The cooking time appears on the display. The cook-
ing time counts down.
8.
Once the cooking time has elapsed, an audible sig-
nal sounds. A note appears on the display confirm-
ing that the operation has finished. The appliance
stops heating up and responds again as usual out-
side of Sabbath mode.
‒ Press ⁠ to switch the appliance off.
The appliance automatically switches off after ap-
prox.10to 20 minutes.
15.2 Cancelling Sabbath mode
▶
Press ⁠ to cancel Sabbath mode.
16 Basic settings
You can configure the appliance to meet your needs.
16.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
Basic setting Selection
Language See selection on the appliance
Time 00:00 - 23:59
Date Day, month and year
Water hardness
→"Before using for
the first time",
Page11
¡ 0 (softened)
¡ 1 (soft)
¡ 2 (moderately hard)
¡ 3 (hard)
¡ 4 (very hard)
Favourites
→"Changing your
favourites",
Page24
Set the heating functions that
you want to appear in the heat-
ing functions menu
Audible signal ¡ Short duration
¡ Medium duration
¡ Long duration
Button tone ¡ Off (except for ⁠)
¡ On
Display brightness 5 settings
Clock display ¡ Digital
¡ Off
Lighting ¡ On during operation
¡ Off during operation
Automatic childproof
lock
¡ Deactivated
¡ Activated
Operation after
switch-on
¡ Main menu
¡ Types of heating
¡ Steam
¡ Baking and roasting assist-
ant
¡ Steam programs
Night-time dimming ¡ Switched off
¡ On (display dimmed
between 10 p.m. and 5.59
a.m.)
Brand logo ¡ Indicators/symbols
¡ Do not display
Fan run-on time ¡ Recommended
¡ Minimum
1
Depending on the appliance specifications
Basic setting Selection
Pull-out rail system
1
¡ Not retrofitted (rack or
single set of pull-out rails)
¡ Retrofitted (two or three sets
of pull-out rails)
Home Connect HomeConnect Settings
→"HomeConnect ", Page25
Factory settings Restore
1
Depending on the appliance specifications
16.2 Changing MyProfile
1.
Press ⁠ to switch the appliance on.
2.
Press ⁠.
3.
Use the ⁠ or ⁠button to select "MyProfile" ⁠.
4.
Use the ⁠button to navigate to the next row.
5.
Use the ⁠ or ⁠button to select a setting.
6.
Use the ⁠button to navigate to the next row.
7.
Use the ⁠ or ⁠button to change the setting.
8.
Press ⁠.
9.
To save your settings, use the ⁠button to select
"Save".
‒ To discard your settings, use the ⁠button to se-
lect "Discard".
16.3 Changing your favourites
In Favourites, you can set the heating functions that
you want to appear in the heating functions menu.
Note:
Some heating functions cannot be deactivated:
¡ CircoTherm hot air ⁠
¡ Circo-roasting ⁠
¡ Full-surface grill ⁠
1.
Press ⁠ to switch the appliance on.
2.
Press ⁠.
3.
Use the ⁠ or ⁠button to select "MyProfile" ⁠.
4.
Use the ⁠button to navigate to the next row.
5.
Use the ⁠ or ⁠button to select "Favourites".
6.
Use the ⁠button to select "Set favourites".
7.
Use the ⁠ or ⁠button to select the required heating
function.
8.
Use the ⁠button to navigate to the next row.
9.
Use the ⁠ or ⁠button to select a setting.
Setting Display in the heating func-
tions menu?
Activated Yes
Deactivated No
10.
Press ⁠.