User Manual
Table Of Contents
- [en] Instruction manual
- Table of contents
- [en] Instruction manual
- ( Important safety information 4
- ] Causes of damage 6
- 7 Environmental protection 6
- * Getting to know your appliance 7
- _ Accessories 9
- K Before using for the first time 11
- 1 Operating the appliance 12
- O Time-setting options 14
- A Childproof lock 15
- Q Basic settings 16
- F Sabbath mode 17
- D Cleaning agent 17
- . Cleaning function 19
- p Rails 21
- q Appliance door 21
- 3 Trouble shooting 24
- 4 Customer service 25
- J Tested for you in our cooking studio 26
- 8 Intended use
- ( Important safety information
- ] Causes of damage
- 7 Environmental protection
- * Getting to know your appliance
- _ Accessories
- K Before using for the first time
- Before using for the first time
- Initial use
- Setting the language
- Setting the time
- Setting the date
- 1. Use the & button to navigate to the next line.
- 2. Use the ( or ) button to select the current day.
- 3. Use the % button to return to "Day".
- 4. Use the ) button to select the next setting.
- 5. Use the & button to navigate to the next line.
- 6. Use the ( or ) button to select the current month.
- 7. Use the % button to return to "Month".
- 8. Use the ) button to select the next setting.
- 9. Use the & button to navigate to the next line.
- 10. Use the ( or ) button to select the current year.
- 11. Use the % button to return to "Year".
- 12. Use the ) button to apply the settings.
- Notes
- Cleaning the cooking compartment
- 1. Remove the accessories from the cooking compartment.
- 2. Remove leftover packaging, such as polystyrene pellets, from the cooking compartment.
- 3. Before heating the appliance, wipe the smooth surfaces in the cooking compartment with a soft, wet cloth.
- 4. Use the # touch button to switch on the appliance.
- 5. Set the heating type and temperature, then start the appliance operation. ~ "Setting and starting the appliance operation" on page 12
- Settings
- Cleaning the accessories
- 1 Operating the appliance
- Operating the appliance
- Switching the appliance on and off
- Setting and starting the appliance operation
- 1. Touch the # touch button to switch on the appliance.
- 2. Use the ( or ) button to select the type of heating.
- 3. Use the & button to navigate to the next line.
- 4. Use the ( or ) button to select the temperature.
- Note:
- Note:
- Default values
- Heating bar
- Run time
- Displaying the current temperature
- Further information
- Changing or cancelling the appliance operation
- Heating up the appliance quickly
- Function
- Type of heating
- Place the food in the cooking compartment
- Notes
- Activating the "Rapid heat-up" function
- 1. Set top/bottom heating ƒ and the temperature.
- Note:
- 2. Touch the # touch button to start the appliance operation.
- 3. Touch the ° touch button to activate the "Rapid heat-up" function.
- 4. Once the set temperature has been reached, the "Rapid heat-up" function switches itself off automatically. The ° symbol disappears from the display. Place the food in the cooking compartment
- Activating the "PowerBoost" function
- O Time-setting options
- Time-setting options
- Time-setting option
- Use
- Note:
- Showing and hiding the time-setting options
- Setting the timer
- Setting the cooking time
- Start delay – "Ready at"
- Notes
- 1. Slide food into the cooking compartment on a suitable accessory and close the appliance door.
- 2. Touch the # touch button.
- 3. Set the type of heating and temperature.
- 4. Touch the 0 touch button.
- 5. Select the cooking time using the ) button.
- 6. Use the & button to navigate to the "* Ready at" line.
- 7. Select the end time using the ) button.
- 8. Touch the # touch button.
- Notes
- Checking, changing or deleting settings
- A Childproof lock
- Childproof lock
- Lock
- Activate/deactivate
- Note:
- Automatic childproof lock
- Activating
- 1. Touch the ± touch button.
- 2. Touch the 0 touch button.
- 3. Use the ( or ) button to select the "Settings".
- 4. Use the & button to navigate to the next line.
- 5. Use the ( or ) button to select "Automatic childproof lock".
- 6. Use the & button to navigate to the next line.
- 7. Use the ( or ) button to select "Activated".
- 8. Touch the 0 touch button.
- 9. Use the & button to navigate to the next line to save the setting.
- Cancelling
- Deactivating
- 1. Press and hold the 0 touch button until "Childproof lock deactivated" appears on the display.
- 2. Touch the ± touch button.
- 3. Touch the 0 touch button.
- 4. Use the ( or ) button to select the "Settings".
- 5. Use the & button to navigate to the next line.
- 6. Use the ( or ) button to select "Automatic childproof lock".
- 7. Use the & button to navigate to the next line.
- 8. Use the ( or ) button to select "Deactivated".
- 9. Touch the 0 touch button.
- 10. Use the & button to navigate to the next line to save the setting.
- 11. Touch the ± touch button.
- Activating
- One-time childproof lock
- Q Basic settings
- Basic settings
- Changing the basic settings
- 1. Touch the # touch button.
- 2. Touch the 0 touch button.
- 3. Use the ( or ) button to select the "" Settings".
- 4. Use the & button to navigate to the next line.
- 5. Use the ( or ) button to select the setting.
- 6. Use the & button to navigate to the next line.
- 7. Use the ( or ) button to select the setting.
- 8. Touch the 0 touch button.
- 9. To save the setting, use the & button to select "Save".
- List of basic settings
- Setting favourites
- Note:
- 1. Touch the # touch button.
- 2. Touch the 0 touch button.
- 3. Use the ( or ) button to select the "" Settings".
- 4. Use the & button to navigate to the next line.
- 5. Use the ( or ) button to select "Favourites".
- 6. Use the & button to navigate to the next line.
- 7. Use the ( or ) button to select the type of heating.
- 8. Use the & button to navigate to the next line.
- 9. Use the ( or ) button to select "Activated" or "Deactivated".
- Note:
- Note:
- F Sabbath mode
- Sabbath mode
- Starting Sabbath mode
- 1. Touch the # touch button.
- 2. Use the ( or ) button to select "Sabbath mode".
- 3. Use the & button to navigate to the next line.
- 4. Use the ( or ) button to select the temperature.
- 5. Use the & button to navigate to the next line.
- 6. Use the ( or ) button to select the cooking time.
- 7. Touch the # touch button.
- Notes
- Cancelling Sabbath mode
- D Cleaning agent
- . Cleaning function
- Cleaning function
- EcoClean
- Floor cleaning aid
- : Warning
- Risk of scalding!
- Starting
- Notes
- 1. Remove the accessories from the cooking compartment.
- 2. Mix 0.4 litres of water (not distilled water) with a drop of washing-up liquid and pour into the middle of the cooking compartment floor.
- 3. Touch the # touch button.
- 4. Touch the 0 touch button.
- 5. Use the ( or ) button to select "Floor cleaning aid ®".
- 6. Use the & button to navigate to the next line.
- 7. Touch the # touch button.
- Finishing
- Final cleaning
- 1. Open the appliance door and remove the remaining water with an absorbent sponge cloth.
- 2. Clean the smooth surfaces in the cooking compartment with a dish cloth or a soft brush. Stubborn residues can be removed using a stainless steel scouring pad.
- 3. Remove limescale with a cloth soaked in vinegar. Then wipe with clean water and rub dry with a soft cloth (including under the door seal).
- 4. Use the # touch button to switch off the appliance.
- 5. Leave the appliance door ajar in the locking position (approx. 30°) for approx. 1 hour to allow the enamel surfaces in the cooking compartment to dry. Alternatively, you can also run the rapid drying function for the cooking compartment.
- Running the rapid drying function for the cooking compartment
- Removing heavy deposits of dirt
- p Rails
- Rails
- Detaching and refitting the rails
- : Warning
- Risk of burns!
- Detaching the rails
- Attaching the rails
- 1. First, insert the rail in the middle of the rear socket ‚, until the rail rests against the cooking compartment wall, and push it back ƒ (figure !).
- 2. Then insert the rail into the front socket „, until the rail also rests against the cooking compartment wall here, and press it downwards … (figure ").
- q Appliance door
- Appliance door
- Removing and fitting the appliance door
- : Warning
- Risk of injury!
- Risk of injury!
- Removing the appliance door
- 1. Open the left- and right-hand hinge lock (Fig. !).
- Tip:
- 2. Open the appliance door a little (Fig. %).
- 3. Using a coin, fully turn both the left- and right-hand locks on the inside of the appliance at the bottom (Fig. &).
- 4. Close the appliance door a little, until you feel the locks engage.
- 5. Lift the door handle slightly on the left- and right- hand side using both thumbs ‚ and pull the appliance door out upwards ƒ (Fig. ').
- 6. Lay the appliance door on an even, soft and clean surface.
- Fitting the appliance door
- 1. Fit the appliance door (Fig. !).
- 2. Fit the appliance door in the left and right-hand guide rollers simultaneously (Fig. ").
- 3. Turn the door handle upwards slightly ‚ so that the appliance door slides downwards fully ƒ (Fig. #).
- 4. Use a coin to release both locks on the appliance door (Fig. $).
- 5. Open the appliance door a little wider and then close it.
- : Warning
- Risk of injury from hinge locks which have not been properly closed!
- Removing the appliance door
- Removing and installing the door panels
- : Warning
- Risk of injury!
- Risk of injury!
- Removal
- Note:
- 1. Remove the appliance door.
- 2. Lay the appliance door with the front side facing down on an even, soft and clean surface.
- 3. Push on the left- and right-hand side on the outside of the appliance door until the inner glass is released on both sides (Fig. !).
- 4. Carefully lift the inner glass and remove it in the direction of the arrow (Fig. ").
- 5. Push the intermediate panel downwards in the ‚ area, carefully lift the ƒ holder until it can be pulled out (Fig. #).
- 6. Lift the intermediate panel from below (Fig. $) and remove it.
- 7. Clean all panels on both sides with glass cleaner and a soft cloth.
- : Warning
- Risk of injury!
- Installation
- Note:
- 1. Insert the intermediate panel and push it in the direction of the arrow until it is fitted in the frame. The arrow on the intermediate panel must line up with the arrow on the frame (Fig. !).
- 2. Push the intermediate panel downwards in the ‚ area, insert the ƒ holder at an angle and push down until it locks into place (Fig. ").
- 3. Insert the inner glass into the holder „ on the left and right (Fig. $).
- 4. Push the inner glass downwards until it locks into place (Fig. %).
- 3 Trouble shooting
- Trouble shooting
- Tip:
- : Warning
- Risk of electric shock!
- Fault table
- Maximum operating time exceeded
- Replacing the bulb in the top of the cooking compartment
- : Warning
- Risk of electric shock!
- Risk of burns!
- 1. Place a tea towel in the cold cooking compartment to prevent damage.
- 2. Turn the glass cover anti-clockwise to remove it (figure !).
- 3. Pull out the bulb – do not turn it (figure "). Insert the new bulb, making sure that the pins are in the correct position. Push the bulb in firmly.
- 4. Screw the glass cover back in.
- 5. Remove the tea towel and switch on the circuit breaker.
- Glass cover
- 4 Customer service
- J Tested for you in our cooking studio
- Tested for you in our cooking studio
- Note:
- Silicone moulds
- Baking
- Roasting and braising
- Grilling
- Convenience products
- Yogurt
- Preparing yogurt
- 1. Heat 1 litre of milk (3.5 % fat) to 90 °C on the hob and then cool down to 40 °C.
- 2. Stir in 150 g (chilled) yogurt.
- 3. Pour into cups or small jars and cover with cling film.
- 4. Place the cups or jars onto the cooking compartment floor and use the settings indicated in the table.
- 5. After preparation, leave the yogurt to cool in the refrigerator.
- Dish
- Cookware
- Shelf position
- Type of heating
- Temperature in °C
- Cooking time in hours
- Preparing yogurt
- Save energy with Eco heating types
- Acrylamide in foodstuffs
- Slow cook
- Drying
- Preserving
- Allowing the dough to prove at dough proving setting
- Defrosting
- Keeping warm
- Test dishes
- [en] Instruction manual
en Cleaning agent
18
--------
Notes
■ Slight differences in colour on the front of the
appliance are caused by the use of different
materials, such as glass, plastic and metal.
■ Shadows on the door panels, which look like
streaks, are caused by reflections made by the
interior lighting.
■ Enamel is baked on at very high temperatures.This
can cause some slight colour variation. This is
normal and does not affect operation.
The edges of thin trays cannot be completely
enamelled. As a result, these edges can be rough.
This does not impair the anti-corrosion protection.
Surfaces in the cooking compartment
The back wall, ceiling and side parts in the cooking
compartment are self-cleaning. You can tell this from
the rough surface.
The cooking compartment floor is enamelled and has
smooth surfaces.
Cleaning enamelled surfaces
Clean the smooth enamelled surfaces with a dish cloth
and hot soapy water or a vinegar solution. Then dry with
a soft cloth.
Soften baked-on food residues with a damp cloth and
soapy water. Use stainless steel wire wool or oven
cleaner to remove stubborn dirt.
Leave the cooking compartment open to dry after
cleaning.
Tip: Using the cleaning aid gives the best results.
~ "Cleaning function" on page 19
Note: Food residues can cause white deposits to form.
These are harmless and do not affect how the
appliance works. You can remove these residues using
lemon juice if required.
Cleaning self-cleaning surfaces
The self-cleaning surfaces are coated with a porous,
matte ceramic layer. This coating absorbs and dispels
splashes from baking and roasting while the appliance
is in operation.
If the self-cleaning surfaces no longer clean themselves
sufficiently and dark stains appear, they can be cleaned
using the cleaning function. To do this, refer to the
information in the relevant section. ~ "Cleaning
function" on page 19
Caution!
Do not use oven cleaner on self-cleaning surfaces. This
will damage the surfaces. If oven cleaner does get onto
these surfaces, dab it off immediately using water and a
sponge cloth. Do not rub the surface and do not use
abrasive cleaning aids.
After cleaning
After cleaning the door seal, check whether it is sitting
correctly on the left- and right-hand side (fig. !).
If the door seal is running over the spacer ‚, push the
door seal inwards so that it now runs beside the
spacer ‚ (fig. ").
Door panels Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
Do not use a glass scraper or a stainless steel
scouring pad.
Door handle Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
If descaler comes into contact with the door han-
dle, wipe it off immediately. Otherwise, any stains
will not be able to be removed.
Appliance interior
Enamel surfaces
and self-cleaning
surfaces
Observe the instructions for the surfaces of the
cooking compartment that follow the table.
Glass cover for
the interior light-
ing
Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
If the cooking compartment is heavily soiled, use
oven cleaner.
Door seal
Do not remove.
Hot soapy water:
Clean with a dishcloth.
Do not scour.
Check the position of the door seal after cleaning
it. ~ "After cleaning" on page 18
Stainless steel
door cover
Stainless steel cleaner:
Observe the manufacturer's instructions.
Do not use stainless steel care products.
Remove the door cover for cleaning.
Rails Hot soapy water:
Soak and clean with a dish cloth or brush.
Pull-out system Hot soapy water:
Clean with a dish cloth or a brush.
Do not remove the lubricant while the pull-out rails
are pulled out – it is best to clean them when they
are pushed in. Do not clean in the dishwasher.
Accessories Hot soapy water:
Soak and clean with a dish cloth or brush.
If there are heavy deposits of dirt, use a stainless
steel scouring pad.
D
2
D
1