User Manual

Q) Can I switch the hand off without it recalibrating/reopening?
A) Yes this is one of the functions of the Program switch situated on the back of the hand. Full details are provided
in the User & Technical guides. Press this button for 3-4 seconds and the hand will go into standby mode and
open/close signals will be disregarded. This is a useful feature for extended tasks such as carrying or holding an
object when moving the hand is not important.
Q) Can the hand be used without a glove?
A) While the hand will work without a glove, we recommend that a glove or finger tips are worn at all times.
Although soft pads are provided to improve compliance the hand structure is hard and smooth. Functionality
may be limited without using the correct cosmetic interface. As a functional device with high tech electronics
and actuators, introduction of dirt and moisture can have a detrimental effect. Therefore use of a glove provides
a physical barrier to such possibilities.
Q) How long will a fully charged battery last?
A) Power usage varies from user to user depending on their activity level; however we expect a fully charged
battery to provide a typical bebionic user with enough power to last throughout the day. If power levels are
dropping to a low level, the hand speed will reduce providing the user with an indication that a charge is
required. The bebionic battery charges rapidly initially and a short 15 – 20 minutes charge will assist users in a
low power situation.
Q) How often should the battery be charged?
A) We recommend that the battery is charged each night so that a regular charging pattern is established and you
start each day with a fully charged battery.
Q) Can I use another manufacturer’s Lithium battery with the bebionic3 Hand?
A) A bebionic hand contains five actuators and consumes a higher current than single motor devices. Therefore
only high current rated battery packs are suitable. We would strongly recommend that only Bebionic battery
packs are used with the Bebionic hand to ensure the best hand performance. Use of lower current rated
batteries with the bebionic system will damage them.
Q) Can I interchange terminal devices on my bebionic prosthesis?
A) If your prosthesis uses a Quick disconnect mechanism then yes! The bebionic battery pack provides the correct
power supply for all standard electric terminal devices. However be aware that if you switch your bebionic hand
onto a prosthesis that does not have a bebionic battery (or incorrectly rated battery) performance will be
severely affected.