Tus neeg siv phau ntawv

11
2. Press the power buon to switch the unit on or o. When switched on, the
funcon indicators will illuminate on the screen.
3. Only pour dislled water into the appliance. The use of tap water can cause
large-scale accumulaons.
4. Select one of the possible funcons:
a. Quick heat: Pour in approximately 500 ml of water, then insert a bole
or jar of food and replace the lid. Press the quick heat funcon buon
and set the temperature between 35°C–40°C, the default temperature is
40°C. The appliance will start the accelerated heang mode. Once heated
to the set temperature, the heater will switch o but will connue to give
o heat, so the actual temperature may dier from the set temperature
by up to ~10°C. If you want a stable heang temperature, use the milk
heang funcon. Check the temperature of the warmed food before
giving it to your baby. Once warming is complete, press the power buon
or quick warm again to put the unit into sleep mode or disconnect the
steriliser from the power supply.
b. Temperature maintenance: Pour between 300 and 500 ml of water,
then insert the bole, pouch or jar of food and replace the lid. Press
the modied milk funcon buon and set the temperature between
40°C–65°C, the default temperature is 45°C. When nished heang,
press the power buon or reheat modied milk to put the unit into sleep
mode or disconnect the steriliser from the power supply.
c. Heang the milk: Pour in between 300 and 500 ml of water, then insert
a bole, pouch or jar of breastmilk and replace the lid. Press the milk
warming funcon buon and set the temperature between 35°C–45°C,
the default temperature is 40°C. When heang is complete, press the
power buon or the milk reheat buon to put the unit into sleep mode
or unplug the steriliser.
d. Defrosng: pour in between 300 and 500 ml of water, then insert a
bole, pouch or jar of food and replace the lid. Press the defrost funcon
buon and set the temperature between 25°C–40°C, the default tempe-
rature is 35°C. Aer 30 minutes, the appliance will go into a 40°C keep
warm state. If you want a constant temperature use the Milk Warm-up
mode. Once heang is complete, press the power buon or the defrost
buon again to put the unit into sleep mode or unplug the steriliser.
e. Sterilisaon: Pour in the correct amount of water according to the selec-
ted programme, then place the boles on the bole holder and insert
them into the machine. SEE FIG B Press the disinfecon funcon buon
and select one of the three modes.
• Mode for plasc boles, pour in 100–120 ml of water. Duraon: 18
minutes, the machine heats the water for 15 minutes and for the next