User Manual

1. Remove all packaging.
2. Carefully place A
2 upside down on a soft surface.
3. Place the U-shaped bolt A
8 between the rst and second n behind the front cover.
4. Place the hook of A8 through the slot on the castor mounting plate A3.
5. Place the thread A8 through the other slot on A3.
6. Screw the wing nut A9 on A8.

Do not overtighten the bolts. This will damage the product.
7. Place the castor wheel A
6 in the hole of A3.
8. Screw the cap nut A5 on A6.
Repeat steps 3 - 10 for A3 between the last two ns on the other side of the product.
4
The HTOI30WT7 has a U-shaped castor mounting plate A4.
Place A4 between the rst and second n behind the front cover.
Point the ends of A
4 to A1.
Installing the product
1. Place the product on a stable and at surface.
2. Turn the power dial B
1 and the thermostat dial B2 to the 0 and MIN position.
3. Connect the power plug A
7 into a power outlet.
C
User manual EN 