User's Manual

Smartcard-Booster LEGIC
© Nedap AVI, P.O. Box 103, NL-7140 AC GROENLO Page 9 of 16
3.3.1.2 RFID OPTIONS
Enable ISO15693
■
The ISO15693 protocol is always enabled because it is required to read
the configuration cards.
Enable ISO14443A
■ Enables reading ISO14443A cards.
Enable LEGIC prime
■ Enables reading LEGIC Prime cards.
Enable Inside Contactless
□ Enables reading Inside Contactless cards (UID only).
Enable FeliCa
□ Enables reading Sony Felica cards (UID only).
Requires Smartcard-Booster LEGIC 2G.
Enable ISO14443B
□ Enables reading ISO14443B cards.
Requires Smartcard-Booster LEGIC 2G.
3.3.1.3 SEARCH DEFINITIONS
Specify what to search for on the LEGIC card. Up to 3 search definitions can be specified. If no match is found on
search definition 1, then it will search for the second.
Search enable
□ Disabled
□ No authentication
■ With segment search
Segment number Number of the desired segment or start segment for searching with
segment search stamp. First segment is segment number 1.
Segment type Segment type to be read.
□ Any segment type
■ Data segment
□ Access segment
Segment stamp search Search string to search a segment with a specific stamp.
Stamp length (prime only) Stamp length for access to LEGIC prime transponders. This parameter is not
interpreted with LEGIC Advant transponders.