User Manual

BOOSTER 2G | USER GUIDE
Installation
5/27
2.3 SOLAR CONTROL WINDSHIELDS
From 1997 onwards several car manufacturers introduced vehicles with solar
control windshields. The solar control windshields are equipped with a metalized
coating, which can block the TRANSIT signal from the Booster mounted on the inside
of the windshield of the vehicle.
Most of these windshields have a metal free zone where transponders can be
mounted. The metal free zone of metalized windshields is most often found in the
middle of the windshield behind and slightly below the rear view mirror. In vehicles
manufactured after 1998 the metal free zone should be indicated on the window.
We advise the owner to contact the local car dealer if it is not clear where the
aperture is exactly positioned in a certain vehicle and where the transponder should
be mounted.
2.4 PROX-BOOSTER TACHO
The prox-booster tacho is a special booster version that should be wired to the
speed pulse generator of your vehicle. The exact wiring details and connection
location very much depend upon the brand, type and model of your vehicle. Contact
your vehicle dealer for more information about the speed pulse generator in your
vehicle.
Tacho input specifications:
• Input voltage: 6V to 24V (max. 30V).
• Polarity reversal tolerant.
• Input prescaler 1:256.
• Maximum pulse frequency 850Hz.
• Maximum vehicle speed 255km/h (at 12 pulses/meter).
hkm /2556.3
12
850
=×=
.