User's Manual
Table Of Contents
- 1 INTRODUCTION
- 2 INSTALLATION
- 3 SMARTCARD CONFIGURATION
- 4 MTR CONFIGURATION
- 5 IDENTIFYING THE BOOSTER WITH A TRANSIT
- 6 BUZZER INDICATIONS
- 7 BATTERY REPLACEMENT
- A TECHNICAL SPECIFICATIONS
- B PART NUMBERS
BOOSTERS
© Nedap IDEAS, P.O. Box 103, NL-7140 AC GROENLO Page 13 of 16
4 MTR CONFIGURATION
The Multi-Technology Reader Module (MTR) is especially designed to read low-frequency proximity
cards and ISO compliant smartcards directly on the TRANSIT Entry reader at short range (without
Booster).
The MTR is configured in exactly the same way as the Smartcard Booster. Refer to chapter 3 on page 5
for more information about the configuration procedure.
For more details about the TRANSIT Entry reader and the MTR refer to the separate documentation.