User Guide

OEM Design-in Guide
Luxon IoT Node Outdoor
5
- Read the design guide completely before design-in the Luxon IoT Node Outdoor.
- Do not connect mains voltage to the 4 low voltage terminals of the Luxon IoT Node Outdoor.
- Make sure the Luxon IoT Node Outdoor is operated within the technical limitations of the specification, see chapter 8.
- Make sure the IoT node RF antenna is not covered or obstructed by metal for the best RF communication.
- Make sure the NEMA connector is always covered either with a Luxon IoT node Outdoor or protective cap.
- Make sure to perform an end-of-line test during production to test all the functions of the luminaire with integrated Luxon
IoT node Outdoor NEMA. See chapter 6 for more information.
Description Units per packaging
Luxon IoT Node Outdoor 24 pcs
Quick Install Guide 1 pc
Luxon IoT Node Outdoor Quick Install Guide
Note: Do not remove any labels from the devices. These labels contain important information.
The minimum order quantity is 1 pc (single packaging)
Description Packaging dimensions Packaging weight [kg/lbs] Storage temperature
(h x w x d) [mm/inch]
Luxon IoT Node Outdoor 275 x 510 x 340 / 4.3 / 9.5 20°C to +70°C /
Multiple Packaging (24 pcs) 10.8 x 20.1 x 13.4 -40°F to 158°F
Luxon IoT Node Outdoor 125 x 125 x 110 / 0.18 / 0.39 20°C to +70°C /
Single Packaging (1 pc) 4.92 x 4.92 x 4.33 -40°F to 158°F
- Store the boxes in a dry place
The local government authority must be consulted for instructions regarding waste processing of the Luxon IoT Node
Outdoor.
1.2 Warnings and instructions
1.3 Package content
1.4 Shipping and storage
1.5 Waste disposal