User Guide

OEM Design-in Guide
Luxon IoT Node Outdoor
4
1 General information
The Luxon IoT Node Outdoor features a cost-effective, brand independent solution to create connected and wirelessly
controllable LED fixtures for outdoor applications. The node differentiates from other products on the market by its
extended functionality, such as performance monitoring and remote diagnostics of LED fixtures by means of a cloud based
light management system. The Luxon IoT Node Outdoor complies with all major LED driver interfaces such as Active DALI,
DALI and 1-10V dim-to-off.
In this OEM design-in guide you will find the information how to design-in the Luxon IoT Node Outdoor into a luminaire and
information about how to do the end-off-line test during manufacturing. For more information or support pls. contact our
OEM Technical Support and Product Manager Richard Hogenkamp at [e-mail]
.
The Luxon IoT Node Outdoor complies with EMC and safety requirements as stated in the specifications, see chapter 8.
Benefits in a nutshell
- Standardized NEMA ANSI C136.41-2013 base
- Cost-effective solution to create internet connected and wirelessly controlled luminaires
- Compatible with Active DALI, DALI or 1-10V dim-to-off LED drivers
- Control of up to 4 drivers in one luminaire
- DALI power supply integrated to control up to 4 DALI LED drivers
- Large RF range
- Easy to integrate, easy to connect
- Temperature sensor integrated
- Support of Nedap motion sensor 12m and 3rd party motion sensors
- Twilight switch integrated
- Over the air (OTA) programming to upgrade the Luxon new features
Typical applications for the Luxon IoT Node Outdoor are parking lot, parking garages, outdoor area lighting, wall packs and
walkways.
Typical Application: Parking Lot
1.1 Introduction