User Guide

OEM Design-in Guide
Luxon IoT Node Outdoor
17
6 Luminaire End-Of-Line test
To test a luminaire with the integrated Luxon IoT Node Outdoor, Nedap can supply two different test tools.
If you do not have a computer available you will need to use the “Luxon wireless OEM test unit” otherwise you can test your
luminaire with the “Luxon wireless control tool”.
In case you want to test an integrated motion sensor, use the “Luxon wireless control tool”.
With the Luxon Wireless Control Tool you can test and demonstrate the functionality of your luminaire with integrated Luxon
IoT Node Outdoor plugged on. You can select a luminaire and switch it on and off and dim to a level between 10% and
100%.
You can also retrieve luminaire information about the operation mode (Active DALI, DALI, 1-10V dim-to-off), internal
temperature, operating hours and more. You need a Windows based laptop and Luxon wireless USB key to use this tool. See
our partner portal to download the software and user manual.
Ordering information Luxon Wireless USB key
Part number: 8014990
With the Luxon Wireless OEM test unit you can check the wireless communication and the correct wiring of the mains and
control wires of the luminaires in your production line.
You can control (switch on/off and dim) the luminaire manually by simply connect and operate with two switches. The
control interface can also be connected to your automated production test tool.
You only need this test unit (no laptop or other peripherals needed) to control a luminaire. See the manual delivered
together with the test unit how to connect it and control your luminaire. Required switches are not included.
Ordering information Luxon Wireless OEM test unit
Part number: 9984968
6.1 Luxon Wireless Control Tool
6.2 Luxon Wireless OEM Test Unit