User Guide

OEM Design-in Guide
Luxon IoT Node Outdoor
11
5 Design-in considerations
TE connectivity is one of the suppliers of the NEMA ANSI C136.41-2013 receptacle. Below you will find the basic
information out of the application specification of TE connectivity.
TE connectivity part number
7 position
(4 dimming / signal)
with 150° C wires
with 105°C wires
2213362-2
2213362-4
TE gasket: 2213626-1
5.1.1 Receptacle Mounting
To provide water-tight mounting, it is highly recommended that the TE gasket (p/n 2213626-1) be used to seal surfaces
between receptacle assembly and luminaire housing. The receptacle housing has two mounting holes which accept #8 size
flat-head recessed screws with 82° bevel heads. When using the TE Gasket, a screw torque of 1.0 to 2.0 N-m is
recommended. Do NOT exceed 3.0 N-m.
Source: TE Connectivity
5.1.2 Mounting Hole Pattern
Source: TE Connectivity
5.1 Receptacle mounting