User Guide

OEM Design-in Guide
Luxon IoT Node Outdoor
10
Wiring diagram 2: DALI application with Luxon IoT Node Outdoor
In 1-10V mode, the dimming voltage range is from 1 to 10V, the output can be set to 0V to switch the LED driver off. The
LED driver need to support dim-to-off functionality for this feature. The IoT node supply voltage must be 12Vdc or 24Vdc.
All 1-10V drivers according to the IEC 60929 / ANSI C82.11 annex A standard with internal or external 12Vdc or 24Vdc
auxiliary supply and dim-to-off functionality (see required threshold level in the specification) shall be compatible with the
Luxon IoT Node Outdoor.
Wiring diagram 3: 1-10V dim-to-off application with Luxon IoT Node Outdoor
1-10V driver requirements:
- One driver needs to supply 12V or 24V to the Luxon IoT Node Outdoor; (Power consumption IoT node: 250mW)
- Please make sure the auxiliary voltage remains available in the 'OFF' status
- All drivers needs to have dim-to-off functionality.
Note:
- For some drivers the control wires have to be considered as basic isolated signals.
- If the 1-10V driver does not support an auxiliary voltage, an auxiliary power supply can be used. See chapter 5.5.
4.3 LED drivers with a 1-10V interface