Assembly Instructions 20 INCH PILLAR WITH GLASS • 20" W x 20" D x 38" H (Light Not Included)
0 Inch Pillar with Glass Kit – Contents Item 4 x 12 x 8" Corner Block Center Block 25 x 25" Top Description Large Lakeland Block (L) Glass Block Glass Block Limestone Top Quantity 28 4 4 1 Adhesive Super-Stik, 29 oz. Tubes 1 LakelandTM blocks have the sophisticated look of an old brick wall so popular with homeowners today. This tumbled, three piece system offers designers the opportunity and freedom to combine functionality with style.
Base Preparation: Base can be constructed of either poured slab or compacted gravel. See requirements below. Zoning and Permits: Before you plan your project, learn about the necessary zoning requirements and rules for excavating and building in your area. No matter how small your project, be sure you obtain the necessary permits before you start construction. Know What ’s Below: Whether you are planning to do it yourself or hire a professional, smart digging means calling 811 before each job.
Course 1 Be sure your properly prepared base is level. Begin building by laying your base course as shown. Using a stiff brush, remove all debris and dust from each block surface to be glued. IMPORTANT: Lay glue bead away from outside perimeter to prevent glue from squeezing out between courses Course 2 Continue to build each course as shown. Use adhesive on each block. IMPORTANT: Use Super-Stik adhesive on each course. Brush excessive dust from blocks to be glued.
Course 3 Course 4 © 2010 Rockwood Retaining Walls, Inc. All Rights Reserved. Please see copyright notice on page 2.
Course 5 Course 6 6 © 2010 Rockwood Retaining Walls, Inc. All Rights Reserved. Please see copyright notice on page 2.
Course 7 RECOMMENDATION: Place glass blocks in position. Lift individually and secure with small tabs of adhesive to allow for access to change light bulb. Course 8 Properly position next course above glass blocks. Lift to glue in place using small tabs of adhesive. © 2010 Rockwood Retaining Walls, Inc. All Rights Reserved. Please see copyright notice on page 2.
Final Step Place top and center. Lift to glue in place. Allow 72 hrs. for adhesive to set before use. 8 © 2010 Rockwood Retaining Walls, Inc. All Rights Reserved. Please see copyright notice on page 2.
Necessories Outdoor Living Kits Kit specifications, style and availability are subject to change without notice.
Assembly Instructions 20 INCH PILLAR WITH GLASS • 20" W x 20" D x 38" H 325 Alliance Place NE Rochester, MN 55906 Available at: toll free 888.288.4045 phone 507.529.2871 fax 507.529.2879 www.rockwoodwalls.com © 2010 Rockwood Retaining Walls, Inc. All Rights Reserved. Made worldwide under license from Rockwood Retaining Walls, Inc. US and international patents issued and pending. This information has been prepared for the benefit of customers interested in Rockwood Retaining Wall products.
