User's Manua switch

User’s Manual U12978EJ3V0UD
210
CHAPTER 16 ELECTRICAL SPECIFICATIONS
Absolute Maximum Ratings (TA = 25°
°°
°C)
Parameter Symbol Conditions Rating Unit
V
DD
−0.3 to +6.5 V
Supply voltage
VPP
µ
PD78F9801 only
Note 1
−0.3 to +10.5 V
Input voltage V
I
−0.3 to V
DD
+ 0.3
Note 2
V
Output voltage V
O
−0.3 to V
DD
+ 0.3
Note 2
V
Per pin −10 mAOutput current, high I
OH
Total for all pins −30 mA
Per pin 30 mAOutput current, low I
OL
Total for all pins 160 mA
In normal operation mode −40 to +85 °COperating ambient temperature T
A
During flash memory programming 10 to 40 °C
Mask ROM version −65 to +150 °CStorage temperature T
stg
µ
PD78F9801 −40 to +125 °C
Notes 1. Make sure that the following conditions of the VPP
voltage application timing are satisfied when the
flash memory is written.
• When supply voltage rises
V
PP
must exceed V
DD
10
µ
s or more after V
DD
has reached the lower-limit value (4.0 V) of the
operating voltage range (see a in the figure below).
• When supply voltage drops
V
DD
must be lowered 10
µ
s or more after V
PP
falls below the lower-limit value (4.0 V) of the operating
voltage range of V
DD
(see b in the figure below).
4.0 V
V
DD
0 V
0 V
V
PP
4.0 V
a b
2. Must be 6.5 V or lower
Caution Product quality may suffer if the absolute maximum rating is exceeded even momentarily for
any parameter. That is, the absolute maximum ratings are rated values at which the product is
on the verge of suffering physical damage, and therefore the product must be used under
conditions that ensure that the absolute maximum ratings are not exceeded.
Remark Unless specified otherwise, the characteristics of alternate-function pins are the same as those of port
pins.