User's Guide

4-14 Configuring Your Server
IMPORTANT: If you select any parameter except for [No Change] to
change TPM State, a confirmation screen as shown below appears at
the end of POST after restarting the system. Select [Execute] on the
confirmation screen to determine the change you have made.
When [Enable & Activate] is selected:
Physical Presence operations
T
PM configuration change was requested to
State: Enable & Activate
Note:
T
his section will switch on the TPM
Reject
Execute
When [Deactivate & Disable] is selected:
Physical Presence operations
T
PM configuration change was requested to
State: Deactivate & Disable
Note:
T
his action will switch off the TPM
WARNING!!!
Doing so might prevent security applications
that rely on the TPM from functioning
as expected
Reject
Execute
When [Clear] is selected:
Physical Presence operations
T
PM configuration change was requested to
State: Clear
WARNING!!!
Clearing erases information stored on the TPM.
You will lose all created keys and access to
data encrypted by these keys.
Reject
Execute