User's Guide

4-10 Configuring Your Server
Peripheral Configuration
IMPORTANT: Note that the interrupt and/or base I/O address are not
overlapped with others. If the value set for the interrupt or base I/O
address is used in another resource, the yellow asterisk (*) appears.
Reset any item with the yellow asterisk properly.
Option Parameter Description Your Setting
Serial Port B Disabled
[Enabled]
Selects whether serial port B is enabled or
disabled.
Base I/O
address
3F8h
[2F8h]
3E8h
2E8h
Selects the base I/O address for serial port
A.
Interrupt [IRQ 3]
IRQ 4
Selects the interrupt for a serial port A.
[ ]: Factory-set