User's Guide

Installing the Operating System B-47
SETTING RECEIVE SIDE SCALING
Two standard network adapter and optional network board need to change the Receive Side Scaling
setting.
Please execute the following procedures.
NOTE: This is common procedure for all Windows OS.
IMPORTANT: Set it in the following procedure before installing
Intel® PROSet in the case of Windows Server 2003/Windows Server
2003 x64 Editions.
1. Open the [Device Manager].
2. Open the property of [Intel(R) PRO/100…] or [Intel(R) PRO/1000…] under [Network
Adapter] tree.
3. Click [Advanced] tab.
4. Change setting of the [Receive Side Scaling] to "Disabled".
5. Reboot the system.
IMPORTANT: If [Receive Side Scaling] is not displayed on Windows
Server 2003/Windows Server 2003 x64 Editions, uninstall Intel(R)
PROSet according to [Uninstall Intel® PROSet].
Set the [Receive Side Scaling] in above procedure.
When re-install Intel® PROSet, refer to [PROSet] (Page B-35, 36).
Uninstall Intel® PROSet
1.
Open the [Control Panel] and double click [Add or Remove Programs].
2. Intel® PROSet is present if the following is displayed in the list.
Intel(R) Network Connections 13.2.8.0
3. Select above [Intel(R) PRO Network…], click [Change/Remove], and Select [All drivers
and software] on [Remove Options] dialog.
4. Click [Remove] button.
5. Click [Finish] button.
6. Close all windows and reboot the system.