User's Guide

Installing the Operating System B-43
9. Refer to the following procedure to set the team member adapter priority status.
– Set Primary
Point the adapter and click [Set Primary] button.
– Set Secondary
Point the adapter and click [Set Secondary] button.
NOTE: Adapter priority config can be confirmed by the following
procedure
1. Click [TEAM:"Team name"] from [Device manager] → [Network
adapters].
2. Click [Settings] and confirm Adapters in team list.
10. Click [Test Switch] → [Run test] to confirm the adapter team is properly setup.
Confirm the result in [Test results]
11. Reboot the system.
Remove Team
This procedure is common in Windows Server 2003 and Windows Server 2008.
1. Open the [Device Manager].
2. Click [Network adapters], and open [TEAM:"Team name"] properties.
3. Click [Setting] tab.
4. Click [Remove Team] button.
5. Click [Yes] to the message.
6. Confirm [TEAM:"Team name"] adapter in not existing in [Network adapters] tree and
reboot the system.