User manual

CHAPTER 4 EQUIPMENT DESCRIPTION
Page 92 NEAX 2000 IPS General Description
NDA-24345, Issue 3
Chapter 4 Equipment Description
Modules
Abbrev Name Code Remarks
SN1617
PIMMD
PIM Port Interface Module (PIM)
Maximum 64 physical ports per PIM.
Houses two batteries for protection from short power
interruption (for 30 minutes).
At maximum configuration, the system consists of
eight PIMs, and provides a total of 512 physical ports
(64 ports × 8).
SN1658
PIMMF
PIM Port Interface Module (PIM) for Backup CPU System -
Maximum 64 physical ports per PIM. Houses two
batteries for protection from short power interruption
(for 30 minutes).
One PIM is required per Backup CPU System.
SN1480
PIMAF
PIM (PIM0) Port Interface Module (PIM) for DC–48 V Power Input
System Mounting the PZ-PW135 Card.
One PIM is required per DC–48 V Power System.
COVER
PARTS
ASSEM-A
COVER
PARTS
ASSEM
Cover Parts Assembly
One cover parts assembly is required for each PIM.
SN1545
BASERE
TOP COVER
ASSEM
BASE/TOP
ASSEM
Base/Top Cover Assembly
One base and top cover assembly is required for each
stack.
SN1685
BASEUC
BASE Base for DC–48 V Power Input System
Installation Cable to Terminal Blocks from this Base is
to be local provided.
Use to joint the A361 PIM-DC.
SN1619
BATTMB
BATTM Battery Module for housing PIM or CS (ZT) backup
batteries
Houses two pairs of batteries for protection from long
power interruption (for 3 hours).