User manual

CHAPTER 3 TERMINALS
NEAX 2000 IPS General Description Page 53
NDA-24345, Issue 3
Dterm Series i Analog Terminals
The Dterm Series i is available in two distinct analog models.
Single-Line Hospitality Single-Line
Descriptions of the Analog Terminals
DTR-1 (WH) TEL
DTR-1 (BK) TEL
Fully modular with Redial key, Flash key, Message Waiting
lamp, Data Jack and Ring/Handset Receive Volume.
DTR-1HM (WH) TEL
DTR-1HM (BK) TEL
Fully modular with Redial key, 'Flash' key, Message Waiting
Lamp, Data Jack, eight programmable Feature/Speed Dial
keys and Ring/Handset Receive Volume.
Line Conditions of the Analog Terminals
Terminal
Type
Card Type
Cable Length*
(Cable 0.5/24 AWG)
PN-4LCD-A
(max. 600 ohms loop resistance)
Approximately:
1.43km (.88 miles)
PN-8LCAA
(max. 600 ohms loop resistance)
Approximately:
1.43km (.88 miles)
PN-AUCA
(max. 2500 ohms loop resistance)
Approximately
12.29km (7.63 miles)
DTR-1
DTR-1HM
PN-4LLCB
(max. 2500 ohms loop resistance)
Approximately
12.29km (7.63 miles)
*Cable length is based on the diameter of the cable and the terminal impedance.