User manual

CHAPTER 5 FEATURE DESCRIPTION
NEAX 2000 IPS General Description Page 145
NDA-24345, Issue 3
Wireless Features
Analog PBX Interface
This feature allows a secretary to interrupt the boss in a private way. By pressing a feature key or
dialing an Access Code, the secretary
Announcement - PS No Answer /
Announcement - PS Out of Zone
This feature allows calls to a PS which cannot be paged in a predetermined period of time to be
routed to the announcement notifying the calling party that the PS cannot answer. Announcements
can be divided between Announcement-PS No Answer and Announcement-PS Out of Zone
depending on the PS condition.
Call Forwarding-Not Available
When a PS is power off or out of zone, a call directed to the PS is forwarded to a VMS, and a voice
mail message can be recorded to the VMS and checked from the PS. Also the VMS can page the PS
automatically after the voice mail message is recorded.
CCIS Interface
This feature allows the WCS to be integrated with NEC PBXs with CCIS interface.
Calling Name Display - PS
Without answering incoming calls or hold calls terminates to the PS, the calling party’s name can be
confirmed by the indications on the LCD.
Calling Number Display - PS
This feature provides a display on the LCD of a PS receiving a call, indicating the station number.
DTMF Signal Sender
This feature allows a PS user to send the DTMF signal (tone) to the called party (terminal, voice mail
system, etc.) while engaged in communication.
GroupCall-Automatic Conference (6/10-Party)
This feature permits a PS user, Dterm user or Single Line Telephone user within the system to
establish a conference among as many as six or ten parties. From a PS/D term /Single Line
Telephone, a maximum of 9 PSs can be paged simultaneously except the conference leader. The PSs
are assigned to the simultaneous paging groups as a participant by the system data beforehand.
GroupCall-2 Way Calling
This feature permits a PS/Dterm /Single Line Telephone can page a maximum of fifteen parties
simultaneously except the group call leader. After one of paged parties answers, the paging becomes
the 2 Way calling between the leader and the first answered party, and paging other parties stops
automatically. The PSs are assigned to the simultaneous paging groups as participants by the system
data beforehand.
Handover
When the signal transmission quality becomes inferior, a PS re-originates a call automatically and
seizes another radio channel, making the WCS handover the call to another zone transceiver to
maintain the speech quality.
Individual PS Calling
This feature allows the calling party to page the individual PS.