User manual

CHAPTER 5 FEATURE DESCRIPTION
NEAX 2000 IPS General Description Page 139
NDA-24345, Issue 3
Centralized Billing - CCIS
This feature is used to collect billing information from each office within the network and to direct it
to the associated center office. Billing information is then forwarded to the central billing centers via
RS232C interfaces.
Centralized Day/Night Mode Change - CCIS
This feature switches the Day/Night mode of a remote office, linked to the main office (2400 IPX)
via CCIS, in accordance with the Day/Night mode switching on the Attendant Console at the main
office.
Centralized E911 – CCIS
This feature allows the system to transmit a calling party number to the 911 Emergency systems over
CCIS tandem connection.
Consultation Hold - All Calls - CCIS
This feature permits a station user, within the CCIS network, to hold any incoming or outgoing
public network or Tie Line call while originating a call to another station within the CCIS network.
Data Line Security - CCIS
This service feature allows the lines which are used for data transmission through CCIS to be
protected from interruptions such as Attendant Camp - On, Busy Verification - CCIS, Executive
Right of Way, and Attendant Override.
Deluxe Traveling Class Mark - CCIS
This feature provides outgoing call restrictions within the CCIS network. The following three types
of restrictions are allowed:
• Deluxe Traveling Class Mark Restriction
• Route Restriction
• Numbering Restriction
Dial Access to Attendant – CCIS
This feature allows a station user to call an Attendant Console by dialing an operator call code
through the CCIS network.
Digital Display - Station - CCIS
This service feature provides a display of the station number on the Attendant Console, during an
Attendant-to-station connection, within the CCIS network.
Digital Display - Trunk - CCIS
This service feature provides the Attendant with a visual indication of incoming and outgoing trunk
calls during an attendant-to-trunk connection within the CCIS network. Trunk Group number and
trunk identification code are displayed.
Direct-In Termination - CCIS
This feature automatically routes incoming exchange calls through CCIS to a pre-assigned station in
the network, without Attendant assistance.
Distinctive Ringing – CCIS
This feature provides distinctive station ringing patterns for terminated calls, through the CCIS
network, so that a station user can distinguish between incoming internal and external calls.
Do Not Disturb - CCIS
This feature allows a station user to establish Do Not Disturb (DND) status on a temporary basis,
during which time access to the station from CCIS calls will be denied.